This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a wash cycle. It is round in shape, and approximately 3 inches in diameter.
This is a pulsator assembly, also known as an agitator, for your washing machine. This pulsator sits at the bottom of your washer and is what is used as the main driving force to wash your clothes. If the pulsator in your washer is broken, it will need replacing immediately to continue to wash and clean your clothes evenly. The cap that sits in the center of this part is sold separately.
This water-level pressure switch in your wash monitors and regulates the water levels throughout the fill, wash, and rinse cycles. You will usually find it inside the control panel or near the tub. It ensures that the washer uses the appropriate amount of water for each cycle and load type. This genuine OEM assembly includes not only the switch itself but also the accompanying air dome tube.
This drain hose assembly is a genuine OEM replacement for LG washing machines. It directs wastewater from the tub to the drain during the wash cycle, ensuring efficient drainage and preventing leaks. Made from thick, durable rubber, it resists corrosion and aging for long-lasting performance. Replacing a damaged hose can resolve issues su...Read morech as poor drainage, leaks, or error codes, restoring optimal washer functionality.
This DC clutch motor assembly controls the drum’s movement during wash and spin cycles, ensuring proper rotation and speed for efficient cleaning and water extraction. It uses a clutch mechanism to engage and disengage torque, allowing smooth transitions between agitation and high-speed spin. Built for durability, this component helps mai...Read morentain performance and reduce wear on fabrics. Replace the assembly if the drum fails to spin correctly, struggles to shift between cycles, makes unusual noises, or displays motor-related error codes. Disconnect power before installation for safety.
This filter assembly is a replacement component designed to capture contaminants and protect internal systems during operation. It helps maintain performance efficiency and is commonly replaced when clogged, worn, or damaged.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The bolt in pulsator kept coming out during the wash
6 of 6 peoplefound this instruction helpful.
Deresa from BOLINGBROOK, IL
Really Easy
Less than 15 mins
Socket set
I found the pulsator just spun freely, I determined the hole on underside should ribbed to align with the ribbed shaft. But it was wore away. I purchased the new part and replacement was simple. It slide right on and I replaced the bolt. Pulsator works great, washing again.
Was this helpful?
Thank you for voting!
Agitator was free spinning
8 of 14 peoplefound this instruction helpful.
Joel from JASPER, MO
Very Easy
Less than 15 mins
Nutdriver, Screw drivers
Removed the center cover cap carefully on top of the agitator with a small screw driver. There are 3 (on mine) little slots around the edge of the bottom of the cap where it meets the agitator. Insert the small flat blade screwdriver and gently twist at each one till the cap pops loose and comes off.
There was a 10MM bolt under
... Read more the cap on mine that you need to remove. I used an cordless impact driver but you could use a socket wrench as well. Remove the bolt and the agitator comes off. May take a little wiggling or it may come right off.
The teeth on the agitator were wore all the way down and gone on mine so it came off easy and this was the issue I had why it was spinning freely. I took the small flat blade screwdriver and used the edge and corner of the blade to clean the teeth on the shaft where the agitator attaches and wiped it down before installing the new part as there was quite a bit of metal shavings from the damaged part.
I just reversed the order of removal to install the new part. Took about 15 min. I ran a rinse and spin cycle to remove any additional metal shavings and to check to see if it all worked properly. THATS IT! TOO EASY!
Read less
Was this helpful?
Thank you for voting!
Pulsator stripped out
5 of 7 peoplefound this instruction helpful.
Anthony from FT WORTH, TX
Really Easy
15 - 30 mins
Screw drivers, Socket set
The teeth in the pulsator assembly where stripped out on the original plate.
Ordered the replacement and it was 1 screw to undo and pop in the new assembly. Super easy repair