EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

WT7400CW (00) LG Washer - Overview

Diagrams for WT7400CW

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Pulsator Cap – Part Number: 5006EA3009B
$47.40
In Stock
Pulsator Cap
★★★★★
★★★★★
(16)
Part #5006EA3009B
This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a wash cycle. It is round in shape, and approximately 3 inches in diameter.
Washer drain Hose Assembly – Part Number: AEM73732901
$47.40
In Stock
Washer drain Hose Assembly
★★★★★
★★★★★
(7)
Part #AEM73732901
This drain hose is a genuine OEM replacement part supplied by LG for use in their washing machines. It is a light gray pipe with a diameter of 1.25 inches. The drain hose is connected to the drain pump, and it is responsible for transporting water out of the washing machine after a cycle. If the drain hose is kinked, damaged, or clogged, the washer will leak, or you may find standing water in the drum at the end of the cycle. Each drain hose comes with a metal clamp for fastening.
Screw – Part Number: FAB30598601
$21.45
In Stock
Washer Switch Assembly sensor – Part Number: 6501EA1001R
$65.73
In Stock
Washer Switch Assembly sensor
★★★★★
★★★★★
(5)
Part #6501EA1001R
This water-level pressure switch in your wash monitors and regulates the water levels throughout the fill, wash, and rinse cycles. You will usually find it inside the control panel or near the tub. It ensures that the washer uses the appropriate amount of water for each cycle and load type. This genuine OEM assembly includes not only the switch itself but also the accompanying air dome tube.
Switch – Part Number: EBF61674802
$138.79
In Stock
Switch
★★★★★
★★★★★
(5)
Part #EBF61674802
This part is the replacement switch assembly for your top-load washer. It contains the switch mechanism and the connecting wire that hooks the door latch to the electrical system of the washer. The lid switch holds lets your washer know when the door is latched, so it can begin the wash cycle. If the lid switch is damaged, it will not allow the washer to run properly. Be sure to disconnect the washer from the power and water sources before you begin this repair. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
Common Washer – Part Number: FAF30369201
$15.00
In Stock
VALVE ASSEMBLY,INLET – Part Number: AJU75152602
$128.66
In Stock
VALVE ASSEMBLY,INLET
★★★★★
★★★★★
(1)
Part #AJU75152602
This inlet valve assembly in your washer controls the flow of hot and cold water into the machine, opening and closing as needed during the wash cycle to ensure the drum fills with water at the correct temperature. This valve is usually at the back of the washer where the water hoses connect to the machine. If the inlet valve is malfunctioning, you may notice issues such as the washer failing to fill with water, slow filling, or water entering the drum when the washer is off. This genuine OEM replacement part, sourced directly from the original manufacturer, is sold separately from supply hoses.
Dispenser Drawer Assembly – Part Number: AAZ72925601
$107.37
In Stock
Drain Pump Assembly – Part Number: AHA75673404
$125.62
On Order
Drain Pump Assembly
Part #AHA75673404
This drain pump assembly is responsible for removing water from your washer during the drain cycle. It is typically at the bottom of the washing machine and connected to the drain hose. If it is damaged, you may notice water not draining properly, unusual drain cycle noises, or a failure to move to the next cycle. This is a genuine replacement part sourced directly from the original manufacturer.
LEG ASSEMBLY – Part Number: 4263FA3933C
$36.85
On Order
LEG ASSEMBLY
Part #4263FA3933C
Motor Stator Bolt – Part Number: 4011FA4353B
$15.00
In Stock
Motor Stator Bolt
Part #4011FA4353B
Washer,Common – Part Number: 4040FA4045C
$29.47
In Stock
Washer,Common
Part #4040FA4045C

Common Symptoms of the WT7400CW

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
leg broke off inside housing
5 of 12 people found this instruction helpful.
  • thomas m from CARMICHAEL, CA
  • A Bit Difficult
  • Less than 15 mins
raised the front of washer by hand (literally) and placed two 2x4 blocks under front lip for support. reached up inside washer cabinet and unscrewed the broken leg piece upwards into the cabinet. this was the only way I could get the broken piece out without some specialized tool to reach it from the underside. replacement with the new leg was a breeze.
Was this helpful?
Thank you for voting!
Drain hose had a pin hole leak external to washer
3 of 6 people found this instruction helpful.
  • Terry from SIMI VALLEY, CA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Very close to the installation video online at Parts Select. Removed the back panel, unclipped the hose from the inner fitting and replaced with the rear hose. Why it didn;t leak on the inside is interesting as there was no clip on the at the inner fitting.
The one difference from the existing install video online was that I didn't have to tip the washer over ~75 degs before replacing. I instead found that I could put to cinder blocks under the back edge to replace the drain hose. This made the job quicker without having to worry about having a box for it to rest on (with any risk of falling to the floor).
Was this helpful?
Thank you for voting!
Detergent and Softner dispenser was not working peoperly
3 of 14 people found this instruction helpful.
  • Roger from Bradenton, FL
  • Very Easy
  • Less than 15 mins
The old dispenser is removed by slightly raising the front as you pull it out of the housing slot. To install the new dispenser, keep the front slightly tilted up and insert the new dispenser into the housing alot
Was this helpful?
Thank you for voting!