This water-level pressure switch in your wash monitors and regulates the water levels throughout the fill, wash, and rinse cycles. You will usually find it inside the control panel or near the tub. It ensures that the washer uses the appropriate amount of water for each cycle and load type. This genuine OEM assembly includes not only the switch itself but also the accompanying air dome tube.
This part is the replacement switch assembly for your top-load washer. It contains the switch mechanism and the connecting wire that hooks the door latch to the electrical system of the washer. The lid switch holds lets your washer know when the door is latched, so it can begin the wash cycle. If the lid switch is damaged, it will not all...Read moreow the washer to run properly. Be sure to disconnect the washer from the power and water sources before you begin this repair. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
This detergent box assembly serves as the drawer that holds and releases detergent and fabric softener during the wash cycle, ensuring proper dispensing for effective cleaning. Made from durable plastic, it’s an easy replacement for a cracked or leaking drawer or when detergent is no longer dispensing correctly. Installing a new dispenser...Read more helps prevent leaks and keeps the washer operating as intended. Be sure to confirm that it matches your specific model before purchasing.
This inlet valve assembly ensures accurate water flow into your appliance for every cycle. Built for reliability and precision, it helps prevent leaks and maintains consistent performance, making it an essential part for smooth operation.
This knob assembly allows users to easily adjust appliance settings such as temperature or power levels. Designed for smooth rotation and a secure fit, it replaces worn, cracked, or missing knobs to restore precise control.
This DC clutch motor assembly controls the drum’s movement during wash and spin cycles, ensuring proper rotation and speed for efficient cleaning and water extraction. It uses a clutch mechanism to engage and disengage torque, allowing smooth transitions between agitation and high-speed spin. Built for durability, this component helps mai...Read morentain performance and reduce wear on fabrics. Replace the assembly if the drum fails to spin correctly, struggles to shift between cycles, makes unusual noises, or displays motor-related error codes. Disconnect power before installation for safety.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John - For model number WT6105CW
April 16, 2026
washer stops after rinse cycle, wont go into spin
Hi John, thank you for your inquiry. If your washer stops mid-cycle, you will need to check the lid lock assembly, part number PS8751171. The washer requires confirmed lid or door closure before spinning as a safety feature. The switch may work fine during agitation and rinse but fail under the higher demand of spin. Glad to be of help!
Hi Marie, thank you for the question. Based on our research, your model does not come with a lint filter. We hope this information helps!
Was this helpful?
Thank you for voting!
Danny - For model number WT6105CW
May 13, 2026
I need the lid for the washer
Hello Danny, thank you for reaching out to us. According to our research, the lid assembly you are looking for is part number PS17290337. We hope this information helps!
The fabric softener dispenser is full of water after a cycle. The detergent dispenser is fine. I have only had the washer for two weeks.
Hello Susan, thank you for the question. Standing water in the fabric softener compartment on a brand new washer is mostly a siphon issue. Start by removing the dispenser drawer and cleaning the fabric softener compartment thoroughly. Pull off the small siphon cap or cover inside that section and rinse everything under warm water to clear any manufacturing residue. Make sure the siphon cap sits completely flat with no gaps when reattached, even a slightly misaligned cap prevents the vacuum siphon effect from working. Check your fabric softener concentration. Thick or concentrated softener doesn't flow freely enough to trigger the siphon. Dilute it 1:1 with warm water before adding it, and never fill past the MAX line, overfilling also prevents proper siphoning. Verify the washer is completely level. Place a bubble level on top of the machine and check both front-to-back and side-to-side. If the machine tilts even slightly, water won't drain toward the siphon port correctly. Adjust the leveling feet until the bubble sits dead center. We hope this is what you were looking for!
Was this helpful?
Thank you for voting!
Prev
1
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
My Orders
