Models > WSXH208F0WW

WSXH208F0WW General Electric Washer - Overview

Sections of the WSXH208F0WW

[Viewing 3 of 3]

Manuals & Care Guides for WSXH208F0WW

Click to download
Keep searches simple, eg. "belt" or "pump".
Door Catch – Part Number: WH10X10004
Door Catch
★★★★★
★★★★★
(3)
PartSelect #: PS269392
Manufacturer #: WH10X10004
Sold individually.
  No Longer Available
Shock Absorber Assembly – Part Number: WH17X10001
Shock Absorber Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS270563
Manufacturer #: WH17X10001
This assembly comes with two shocks, four nuts, one leveling leg pin and instructions. These shock absorbers keep the washer from vigorous shaking during it's cycles.
  No Longer Available
Drain Pump – Part Number: WH23X10016
Drain Pump
★★★★★
★★★★★
(1)
PartSelect #: PS271336
Manufacturer #: WH23X10016
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.
  No Longer Available
Tub Spring with Sleeves – Part Number: WH01X10022
Tub Spring with Sleeves
★★★★★
★★★★★
(1)
PartSelect #: PS268413
Manufacturer #: WH01X10022
Sold individually.
$105.75
  Special Order
SCREW 8-18 X .31 – Part Number: WR2X9494
SCREW 8-18 X .31
★★★★★
★★★★★
(1)
PartSelect #: PS299875
Manufacturer #: WR2X9494
This screw is sold individually. Size 8 - 18 x 0.31
$35.38
  Special Order
SCREW-LOCK 10-16X 50 – Part Number: WH02X10009
SCREW-LOCK 10-16X 50
PartSelect #: PS268957
Manufacturer #: WH02X10009
  No Longer Available
Coin Trap – Part Number: WH41X10010
Coin Trap
PartSelect #: PS272003
Manufacturer #: WH41X10010
  No Longer Available
Water Inlet Valve – Part Number: WH13X78
Water Inlet Valve
★★★★★
★★★★★
(1)
PartSelect #: PS270303
Manufacturer #: WH13X78
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
$132.53
  On Order
Inlet Hose - 2 pack – Part Number: WH41X10207
Inlet Hose - 2 pack
PartSelect #: PS2340055
Manufacturer #: WH41X10207
Includes 2 hoses that are 4 feet long, and 4 seals.
$23.77
  In Stock
Order within the next 11 hrs and your part ships today!
Drain Hose – Part Number: WH01X10189
Drain Hose
PartSelect #: PS756357
Manufacturer #: WH01X10189
  No Longer Available
Rotary Knob - White – Part Number: WH01X10111
Rotary Knob - White
PartSelect #: PS268497
Manufacturer #: WH01X10111
Sold individually. This knob accepts a D shape shaft.
  No Longer Available
Timer – Part Number: WH12X10152
Timer
PartSelect #: PS269881
Manufacturer #: WH12X10152
The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
$236.93
  Special Order

Questions And Answers for WSXH208F0WW

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the WSXH208F0WW

[Viewing 4 of 4]
Lid or door won’t close
Fixed by
these parts
Fixing
Show All
Will not drain
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken Spring & broken level-shock.
Disconected power & hoses. Removed 4 screws from two tabs at rear of top. Slid top fwd & up to remove. Removed two screws from lower front panel and removed panel. Removed back cover screws and back cover. Placed sling arround tub & lifted with 2"X4" on strap placing additional wood under sling supported by edges of machine. Removed one scred and loosened mother that held spring hook in place. removed broken end and remainder of spring. hooked spring in hole in tub and raised spring upper hook on to support , re installed retainer. Went to lower side and removed plastic push bolts, by slipping a 1/2 " deep socker over front end and pulling from back with plirers.allign the holes in the new shock with the mount holes and nock them in place. remove sling from arround tub and re assemble all removed parts.
Parts Used:
Shock Absorber Assembly Tub Spring with Sleeves
  • STEWART from STOKESDALE, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
17 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The water pump becomes very noisy
This is the second time in the same 7 year old appliance. Remove the front bottom cover by removing 2 screws. Then remove the 2 screws holding the pump down. Then unclip the electrical wire from the pump and remove both hoses from the pump by squeezing the spring clamps with a pliers. Have a pan to collect the water that will drain from the lines. Take the new pump and install it in reverse order from above.
Parts Used:
Drain Pump
  • Roger from Hudson, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
13 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken shock absorber
after pulling pins and installing new shocks, the washer still made loud ,disturbing sounds during use. Did some more investigating, turns out the inner bearings on the drum are bad. Apparently a problem with this model. Probably why the original shocks broke in the first place.
Parts Used:
Shock Absorber Assembly
  • leslie from circleville, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!