This assembly comes with two shocks, four nuts, one leveling leg pin and instructions. These shock absorbers keep the washer from vigorous shaking during it's cycles.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donald - For model number WSSH300G1WW
November 21, 2021
Does everything but spin.
Hello Donald, Thank you for the question. One of the most common reasons a washing machine has stopped spinning is it can not drain properly due to a blocked drain pump or hose. We suggest checking the drain system for a clog or blockage. We hope this helps!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Brandy - For model number WSSH300G1WW
September 7, 2022
Washer will start and within seconds the Spin Option changes from Hi to No Spin shutting down the cycle.
Hello Brandy, Thank you for the question. This could be an indication the Drive Motor is faulty and may need to be tested or replaced. We hope this solves your problem!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Carl - For model number WSSH300G1WW
February 21, 2025
Washer occasionally has loud buzzing/whining sound coming from inside. Sometimes when pushing start button the noise starts but after waiting a few seconds it will start as it should. Recently, it has begun to do this during the wash cycle but will eventually drain and cycle ends. Even though the washer is 15 years old it has been used very infrequently as it’s at a vacation home.
Hello Carl, thank you for your inquiry. The issue described has to do with the board. The Control Board PS12749287 manages the washer's functions such as filling, washing, draining and spinning. We hope this helps.
Hi GE Expert,
I have GE Washer model WSSH300G1WW, the handle that I open the drawer with, to load my laundry broke. What can I do to get it fix?
Thank you,
Hi Ariel, thank you for reaching out. We would recommend replacing the drawer handle, part number PS1482316. We hope this solves your problem!
Hi Charlie, thank you for your inquiry. If your washer does not start, you will need to check for a blown fuse. Check if there are melted or loose wires. A burnt-out power outlet can prevent your washer from starting. Check your door latches and door switch. If your washer door is not closed properly, it will not start. A faulty timer can also prevent the washer from starting. Please submit a new question if you have any follow-ups.
Was this helpful?
Thank you for voting!
Prev
1
2
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken Handle due to poor design
32 of 38 peoplefound this instruction helpful.
Charles from Marathon, FL
Really Easy
Less than 15 mins
Screw drivers
Unscrew 2 screws. Replace handle with the same screws.
Was this helpful?
Thank you for voting!
Washer would not drain
31 of 45 peoplefound this instruction helpful.
Jack from Canyon Lake, TX
Really Easy
15 - 30 mins
Nutdriver, Pliers
Removed 2 Hose clamps with pliers. Unplug power source from drain pump. Unscrew 2 mounting screws with 5/16" nut-driver then replace unit in reverse sequence...... Very simple.
Was this helpful?
Thank you for voting!
broken shock absorber
10 of 12 peoplefound this instruction helpful.
leslie from circleville, OH
A Bit Difficult
30 - 60 mins
Pliers, Screw drivers
after pulling pins and installing new shocks, the washer still made loud ,disturbing sounds during use. Did some more investigating, turns out the inner bearings on the drum are bad. Apparently a problem with this model. Probably why the original shocks broke in the first place.
My Orders
