Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
Model has been saved to My Models. If you're not signed in, your lists are available on this device and will expire within 30 days.
Model has been saved to My Models.
This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model...
This water filter is a genuine replacement for bottom-freezer refrigerators that accept a Filter 2. it is certified to remove up to 24 different contaminants which include pharmaceuticals, waterborne ...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help s...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This part is a replacement refrigerator drive shaft seal for your refrigerator. The drive shaft seal protects the auger motor from water and condensation that may leak down the drive shaft from the ic...
This ice container is the part of your freezer where freshly made ice is collected and stored, making it easy to grab cubes or crushed ice whenever you need it. It features a sturdy white base connect...
This OEM, 120V, 60 HZ water inlet valve is specially designed for refrigerators. It is responsible for regulating the flow of water into the water dispenser and ice maker of the fridge. If your refrig...
This crisper drawer cover or frame assembly is a genuine OEM replacement part that is specially designed for refrigerators. This includes the front support. It has dimensions of approximately 19 inche...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
$36.85
In Stock
Order now and your part arrives by Apr 23
Questions And Answers for WRX988SIBM00
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ted
August 26, 2021
Freezer is below freezing. Fridge is 60 degrees. I replaced the evaporator fan.
For model number WRX988SIBM00
Hello Ted, Thank you for your inquiry. We have researched your model and recommend checking the following parts to fix your issue: the temperature sensor/thermistor, defrost heater and the damper control assembly. There are also two evaporator fan motors in this model, one in the freezer that also has the defrost thermostat-PS11770336, and one in the refrigerator-PS8691851. If you have replaced one, the other may need to be replaced as well. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Hope this helps.
Is there a seperate fan for the refrigerator part of this unit. If so where is it?
For model number WRX988SIBM00
Hello Faye, Thank you for your inquiry. We have researched the model number that you have provided and show that there is a separate fan for the refrigerator section and is located behind the evaporator housing in the refrigerator. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Did this question help you?
Thank you for voting!
Angela
June 12, 2023
When I opened the ref door, there was water dripping from the ice maker. I lifted the chute and there was water in the maker. Ice in the dispenser in the door. what could be the issue?
For model number WRX988SIBM00
Hello Angela, thank you for your question. Our research shows that it could be low water pressure. The water inlet valve needs at least 20 psi to work properly. If it is not getting that water pressure, then the valve may not close all the way when it stops flowing. The effect of this is that water will continue to slowly drip into your ice maker, overfilling it. We hope this helps.
1 person found this helpful.
Did this question help you?
Thank you for voting!
Lorena
June 24, 2024
Why is my fridge leaking water when bottom drawer’s are opened ?
For model number WRX988SIBM00
Hello Lorena, thank you for reaching out. According to our research, the issue could be with the drain funnel, part number PS5573853. You may need to replace it to fix the issue. Glad to be of help!
Hello Linda, Thank you for your inquiry. You should be able to twist the old filter counter clock wise to the left and pull it out. If it is sticking then there may be an issue with the housing, or with the o-rings on filter prongs. To remove the housing to try and get the filter out, remove the two screws found just in front of where the filter sits. Then, using a putty knife, the cover panel would need to be pulled down at the front where it has a seam at the top front. This will allow access to the filter housing to be able to pull it out and detach the old filter. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Purchased new motor from Partselect.com. When it arrived it came with a new rubber washer that fitted on top of new motor that was not on old motor, that how water got into old motor. However, the instruction sheet did not give info on how to access the proper way to the motor that is the door. Not wanting to damage the freezer door assy.
... Read more called in a tech who made it look easy, but even he had a little problem locating access panel that was directly under the motor in the freezer side of the door. After that it was a piece of cake.
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working.
