This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model...
$21.60
In Stock
Order within the next 1 hr and 41 mins and your part ships today!
This water filter is a genuine replacement for bottom-freezer refrigerators that accept a Filter 2. it is certified to remove up to 24 different contaminants which include pharmaceuticals, waterborne ...
$90.90
In Stock
Order within the next 1 hr and 41 mins and your part ships today!
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
$27.70
In Stock
Order within the next 1 hr and 41 mins and your part ships today!
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.02
In Stock
Order within the next 1 hr and 41 mins and your part ships today!
This part is a replacement refrigerator drive shaft seal for your refrigerator. The drive shaft seal protects the auger motor from water and condensation that may leak down the drive shaft from the ic...
$14.61
In Stock
Order within the next 1 hr and 41 mins and your part ships today!
This ice container, also known as an ice bucket or ice bin, is an authentic OEM part that is designed to fit with refrigerators. It consists of a white base attached to a transparent plastic dish with...
$241.83
In Stock
Order within the next 1 hr and 41 mins and your part ships today!
This OEM, 120V, 60 HZ water inlet valve is specially designed for refrigerators. It is responsible for regulating the flow of water into the water dispenser and ice maker of the fridge. If your refrig...
$88.34
In Stock
Order within the next 1 hr and 41 mins and your part ships today!
This crisper drawer cover or frame assembly is a genuine OEM replacement part that is specially designed for refrigerators. This includes the front support. It has dimensions of approximately 19 inche...
$110.64
In Stock
Order within the next 1 hr and 41 mins and your part ships today!
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
$22.68
In Stock
Order within the next 1 hr and 41 mins and your part ships today!
Order within the next 1 hr and 41 mins and your part ships today!
Questions And Answers for WRX986SIHZ01
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Daniel Duimstra
November 18, 2022
The left 1/2 door has a flange that is to receed so that the left half will slide by the right half allowing both left and right doors to be closed. Ours sicks and has to be pushed in allowing clearance. What is the fix?
S/N KX2510930
For model number WRX986SIHZ01
Hello Daniel, Thank you for your inquiry. Researching the model number you have provided, this is usually caused by an issue with the door flapper/mullion or where it snaps into. Check the area on the door for any visible damage, and if there is no issues with the door, then we would recommend replacing the mullion. We hope this helps.
Water dispenser painfully slow. New filter (Everydrop 2) doesn’t help. Flushing new filter doesn’t help. Have had the fridge repair people out three times, their only solution “try a new filter” which never solves the issue. Fridge water dispenser worked perfectly three years ago when it was brand new and has been getting progressively worse. Help!!
For model number WRX986SIHZ01
Hi Steve, thank you for your question! Damaged or pinched water lines could be the reason for a slow water dispenser. You’ll need to inspect the water line outside your fridge to check it for damage. If you do not see any damage, make sure there are no “kinks” in the tube. If you want to check the water pressure on the refrigerator from the house. Just put the water supply hose in a 5-gallon bucket and let it run for 15 seconds to make sure you have good pressure and the saddle valve or whatever valve supplies water from the house to the refrigerator is not being restricted. If the water supply is good, disconnect the water line under the valve and put a towel underneath. Push the dispenser paddle and see if the pressure coming out of the valve is good. If all checks well, you are down to either the water filter or the filter housing. You already replaced the filter, so we recommend replacing the water filter housing, part number PS12348915. Good luck with this repair!
After getting ice. Fridge lost all power and will not come back on. Plug/outlet is working good. What could it be?
For model number WRX986SIHZ01
Hi Robby, thank you for reaching out. Based on our research, the issue is most probably with the main control board, part number PS11730991. It manages the functions of the refrigerator such as cooling and defrost times. You may need to replace it to fix the issue. We hope that helps!
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Purchased new motor from Partselect.com. When it arrived it came with a new rubber washer that fitted on top of new motor that was not on old motor, that how water got into old motor. However, the instruction sheet did not give info on how to access the proper way to the motor that is the door. Not wanting to damage the freezer door assy.
... Read more called in a tech who made it look easy, but even he had a little problem locating access panel that was directly under the motor in the freezer side of the door. After that it was a piece of cake.
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working.
