The EDR1RXD1 water filter provides clean, fresh-tasting water by reducing contaminants such as lead, chlorine, and particulates. Designed for easy installation, this filter ensures your refrigerator water and ice are safe and refreshing with every use
This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model number to see if this filter is right for your fridge. Location for storage of the air filter may vary from model to model, but generally, ...Read moreyou will find a small cover on the back-middle-top of your fridge, which can be popped off to reveal the air filter, which can be easily changed out from there. This part does not come sold with the indicator; it is the filter only. Sold individually.
Tired of your fridge not making ice? This replacement ice maker can fix that. It automatically fills with water, freezes it, and drops ice into the bin—so you always have ice ready for drinks or cooking. It’s made to fit several Whirlpool, Maytag, and KitchenAid models and is great if your current ice maker is leaking, noisy, or just not working. Easy to install and ready to get your ice supply back on track.
This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help solve the issue. Replacing this part is easy and requires minimal disassembly of the refrigerator end cap handle. Your will need a screwdriver to complete this repair.
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate the cold air into the refrigerator and freezer sections. The fan blade is white in color and made from plastic. This is a genuine OEM part...Read more. Please be sure to disconnect the power to your refrigerator before starting your repair.
This part is a replacement refrigerator drive shaft seal for your refrigerator. The drive shaft seal protects the auger motor from water and condensation that may leak down the drive shaft from the ice bucket. If the seal is broken, water and condensation can get in, causing the ice maker to fail. To replace the seal, first remove the ice...Read more bucket from your freezer. Then remove the two screws on the drive shaft holder, and use a pair of pliers to remove the drive shaft. At this point you can remove the seal from the drive shaft. Be sure to clean the area that the seal sits in before you reinstall the drive shaft. This part is white in color and is about an inch in diameter. The seal is sold individually.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wayne - For model number WRS973CIDM00
April 14, 2023
The ice maker stopped working. Will not fill with water and ice tray does not have any DC voltage. I suspect the main control board #20 or #30 of the cabinet parts list. Do I need both boards or just one and which one? Thanks, Wayne
Hello Wayne, thank you for your inquiry. Based on the description that you have provided, we would recommend replacing the control board, part number PS11750687. We hope this is what you were looking for!
I require a freezer drawer--what part number and cost, please
Hi Douglas,
Thank you for your question. There are 2 freezer drawers listed for your refrigerator. The part number for the bottom drawer is PS11755350. The part number for top drawer is PS11755351. We hope this helps!
Refrigerator - Air Filters. i could jot find on the website.
Freezer - If both lights are off in the freezer, could that have something to do with the button at top - that goes in when you close the door.?
The refrigerator is about 4.5 years old. do freezer LED lights go out at that time?
Thank you very much for your help
Hello Rosie, thank you for reaching out. The air filter for your model is listed on our site with part number PS2580853. Based on the description that you have provided, we would recommend checking the door switch, part number PS16218024, to fix the issue regarding the freezer light not being turned on. The door switch turns the freezer lights on/off as the freezer door opens and closes. We hope this sorts out your problem!
How do you replace the upper light assembly in the freezer
Hi Mitchell,
Thank you for your question. Before beginning this repair, please unplug the refrigerator from the electrical outlet. To remove the LED light module, you will need a putty knife, a pair of side cutters and a pair of pliers. To remove the LED light, use a putty knife and slide it under the bottom part of the light as there are tabs there. So squeeze in and pry it out and then go around the light to loosen the rest of the tabs. Then press down on the locking tab and disconnect the plug to remove the light. Then plug the new LED light in and insert the wires into the hole. Then insert the LED light. We hope this helps!
freezer stays at 10 degrees, fridge was in 50's I changed fan on evaporator fan in fridge side and it started working correct 30 to 40 degrees but now in 5o's
freezer still at 10 it has switched from working to not working, I have also reset unit
Hi Herb, thank you for contacting us. Since you have replaced the evaporator fan motor, we would suggest checking the thermistor, part number PS17916840. You may need to replace it to fix the issue. We hope this solves your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lights inside refrigerator not working
137 of 257 peoplefound this instruction helpful.
Clint from Rayville, MO
Really Easy
Less than 15 mins
Screw drivers
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Was this helpful?
Thank you for voting!
Light Switch broke
48 of 78 peoplefound this instruction helpful.
James Richard from St. Cloud, MN
Easy
Less than 15 mins
Socket set
An easy job for smaller hands. Removed the two bolts holding the light cover. Removed two electrical connections from the old switch by pinching the retaining clip,removed the switch, snapped in the new one and re-attached the connectors. Your online illustrations helped me to know that the plastic housing for the light switch would only
... Read moreswing down so far and was not intended to be removed. Saved me from breaking that plastic cover's tabs. This home repair saved me more than 5 times the cost of hiring a professional to do it. Very happy homeowner.
Read less
Was this helpful?
Thank you for voting!
Had to replace a hose connector at the base of my refrig/frreezer
47 of 81 peoplefound this instruction helpful.
Leo from Salem, SC
Really Easy
Less than 15 mins
Perhaps a helpful hint:
When aI received the hose adapter/connector, I inserted the 2 hose ends only to have water drip from the connection. I used a utility knife to remove an inch from each side, then reinserted the hoses. That made the differnce. Dry as a bone.
My Orders
