This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
This is a crisper drawer shelf frame cover for models of refrigerator. This frame sits above the crisper drawer and allows a glass insert to be installed on top of it, for further food item storage and to properly seal the crisper drawer itself. If this frame is cracked, bent, or warped, it should be replaced immediately so it can properl...Read morey support the drawer that slides into it. This frame measures approximately 13 inches deep and 16 inches wide, and is made of durable white plastic. This frame is an OEM part, and does not include the glass insert that lays on top of it or the drawer that slides in below.
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
This authentic OEM black touch-up paint is specifically designed for repairing minor scratches, chips, or blemishes on your kitchen appliances. The bottle contains 16ml or 0.6oz of black paint and has an applicator brush under the cap, the same way a nail polish bottle is designed. Restoring these visible damages is important because crac...Read moreked or chipped surfaces can become a breeding ground for dirt and bacteria. If your existing bottle of paint has a thick or clumpy consistency, do not use it. Remember to shake the bottle before applying the paint to your appliance. Please keep in mind that this bottle is sold individually.
This Refrigerator Ice Maker Installation Kit connects the house water supply, to the refrigerator for ice maker and water dispenser operation. This kit includes 15-ft of copper tubing, (1) saddle valve, tape, and (1) tubing connector.
This refrigerator water filter housing is designed to securely hold the water filter in place while connecting the water supply lines to ensure proper filtration. It plays a critical role in maintaining the flow of clean, filtered water by protecting the filter from damage and ensuring it remains properly seated during operation. The hous...Read moreing supports the refrigerator’s water purification system by facilitating the removal of impurities and preserving water quality. Constructed from durable materials, it is built for long-term performance and reliability. Installation involves disconnecting the water supply, removing the old housing, and securing the new one using the existing fittings. Always verify your refrigerator’s model number to ensure compatibility before installation.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Scratches in Surface
83 of 227 peoplefound this instruction helpful.
Michelle from Richardson, TX
Really Easy
Less than 15 mins
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Was this helpful?
Thank you for voting!
Noise in Evaporator Fan section
6 of 17 peoplefound this instruction helpful.
Richard from HOLLISTER, CA
Really Easy
30 - 60 mins
Screw drivers
Opening up the Evaporator Fan section was a quick and easy job. After opening, I checked and removed the fan and looked at the grommet. The grommet on the fan was tight and secure and I could no longer hear the noise. I closed the opening. Something I had done while checking the fan grommet must have solved the problem. I have not hear th
... Read moree noise again!
Read less
Was this helpful?
Thank you for voting!
Plastic ice door hinges broke
1 of 2 peoplefound this instruction helpful.
Roy from HOUSTON, TX
Very Easy
More than 2 hours
Replacement part arrived via FedEx package with one hinge already broken off, unable to install. Still waiting on requested replacement.