This is an OEM replacement ice and water filter for your refrigerator. In side-by-side refrigerators, it is found in the top right corner or the bottom left grille. In bottom-freezer refrigerators, th...
$103.96
In Stock
Order within the next 6 hrs and your part ships today!
This is a door shelf bin made for use within some models of refrigerators. This shelf bin is used to hold food items and containers, but if it is cracked or damaged and no longer able to hold any item...
$127.25
In Stock
Order within the next 6 hrs and your part ships today!
This is a manufacturer-made crisper drawer for your refrigerator. Crisper drawers are used to store fruits and vegetables at different humidity levels than the rest of your fridge. If your current cri...
$112.03
In Stock
Order within the next 6 hrs and your part ships today!
This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may...
$36.12
In Stock
Order within the next 6 hrs and your part ships today!
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.00
In Stock
Order within the next 6 hrs and your part ships today!
This authentic Whirlpool refrigerator part is a door shelf rail. It snaps into your refrigerator door and prevents items from sliding or falling out when your open the door. It is made of plastic and ...
$49.88
In Stock
Order within the next 6 hrs and your part ships today!
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...
$37.20
In Stock
Order within the next 6 hrs and your part ships today!
Questions And Answers for WRS325SDHW00
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marie
November 21, 2021
Lots of moisture in this refrigerator. Is there a dehumidifier kit available to this model? If so can it be installed?
For model number WRS325SDHW00
Hello Marie, Thank you for the question. Moisture in the Fridge could indicate the Door are not sealing properly and the Gasket Seal for the Door may need to be replaced. We hope this helps!
How do i reset the panel when i change the water filter
Thank you
For model number WRS325SDHW00
Hello Linda,
Thank you fro your question. Push and hold the reset filter button on the dispenser once the new filter is replaced for 10 seconds, once the filter light turns green it should be reset. We hope this helps!
I am looking for a manual for this model refrigerator
For model number WRS325SDHW00
Hello and thank you for writing.
For your convenience, we have attached the link to your service manual. We hope this helps. Good luck with your repair.
https://www.whirlpool.com/content/dam/global/documents/201711/UseandCare-W11101941-RevA(ECO).pdf
Was this helpful?
Thank you for voting!
Dawn
December 30, 2023
When replacing water/ice filter, how do you reset it for filter light to go off?
For model number WRS325SDHW00
Hello Dawn, thank you for asking. According to our research, reset the filter status light by pressing and hold light and ice type buttons for 3 seconds. The status light will turn off when the system is reset. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
The repair was actually easy; however I have an ice dispencer/crusher attached and the which the diagram supplied with the part did not include. I had to make several calls before I was e-mailed the diagram. Suggestions: note that the screw at the end of the auger goes in the reverse direction (this took me about 20 minutes to fi
... Read moregure out even though it was shown in the diagram). Also, be sure to keep the ice crusher parts in order and be sure the white plastic tab on the crusher fits into a depression in the housing. I did not notice this and had to take it all apart and redo the install. It works great!!!