The EDR1RXD1 water filter provides clean, fresh-tasting water by reducing contaminants such as lead, chlorine, and particulates. Designed for easy installation, this filter ensures your refrigerator water and ice are safe and refreshing with every use
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light when your fridge door is open, and to make sure it is off when your refrigerator door is closed. The reason you would need to replace this p...Read moreart is if your light is not turning on when your door is open. For this repair, you will need a putty knife, and a small flat-blade screwdriver.
This is a door shelf bin made for use within some models of refrigerators. This shelf bin is used to hold food items and containers, but if it is cracked or damaged and no longer able to hold any items, it needs to be replaced immediately. This shelf measures 15-inches wide at its widest point, and 13-inches wide where it would be install...Read moreed, as well as 6.5-inches deep and 3.5-inches tall. This shelf bin is an OEM part, and does not come with any other shelves or parts.
This is a manufacturer-made crisper drawer for your refrigerator. Crisper drawers are used to store fruits and vegetables at different humidity levels than the rest of your fridge. If your current crisper drawer is cracked or broken, it will need replacing immediately to ensure your food lasts as long as possible. This crisper drawer is m...Read moreade of clear and frosted plastic, and measures approximately 16.5" x 16.3" x 9.05" (Width x Depth x Height). This crisper drawer is sold individually and does not come with any other drawers or parts.
This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help solve the issue. Replacing this part is easy and requires minimal disassembly of the refrigerator end cap handle. Your will need a screwdriver to complete this repair.
This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may need to be cut. This water tube transports water to the ice and water dispensers. If your refrigerator is leaking, or if the ice and water ...Read moredispensers are not dispensing properly, you may need to replace this tube. This part is sold individually and is an OEM part sourced directly from the manufacturer.
This authentic Whirlpool refrigerator part is a door shelf rail. It snaps into your refrigerator door and prevents items from sliding or falling out when your open the door. It is made of plastic and is approximately 17 inches in length by 5 inches in width. To replace this part, simply snap out the old door shelf rail and install the new one.
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William - For model number WRS321SDHZ01
April 10, 2023
You replied to my question about which water filter to use but you replied using the wrong Model number. You gave me the filiter part number for a model WRS321SDHZ01 ! Not one ending in 201. Please review and furnish correct filter part number. Thanks
Hello William, Thank you for the question. The Model number ending in 201 is not a valid number. The 2 is actually a Z. There is no model with a 201, there has to be a letting and then two numbers. The options for the letters are B, V, W or Z. The filter PartSelect Number PS11701542 fits all options listed. We hope this helps!
The water is not dispensing through the door. So, any chance a filter will correct it?
Hi Susan, thank you for the question. Yes, there is a very high chance that a clogged water filter is causing the issue, as a filter completely filled with sediment or past its 6-month lifespan will totally block water from flowing to the door. But before replacing the water filter, ensure that the water inlet valve is working properly and there is no blockage in the water inlet line. If these are fine, then you may need to replace the water filter, part number PS11701542. We hope this sorts out your problem!
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Shane - For model number WRS321SDHZ01
November 16, 2024
What are the dimensions of this unit. Width and height
Hello Shane, thank you for your question. The Dimensions are: Total Capacity: 21.4 Cu. Ft., Width: 32 3/4 Inch, Depth: 33 5/8 Inch, Depth with Door at 90°: 49 5/16 Inch, Height: 66 5/8 Inch. We hope this helps.
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Shawn - For model number WRS321SDHZ01
August 18, 2025
Dispenser motor continuously running when freezer door is shut.
Hello Shawn, thank you for reaching out. The control board that regulates the dispenser motor might be faulty, leading to the motor running non-stop. We would suggest checking it, the part number is PS16543525. We hope this information is useful!
Will my ice maker still make ice without a water filter insured ?
Hi Joseph, thank you for the question. According to our research, most refrigerators and ice makers can function without a filter as long as you're willing to put in a filter bypass for them. We would recommend replacing the water filter, part number PS11701542, for better functioning. We hope this helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Plastic bits dispensed from Ice Dispenser in Door
205 of 254 peoplefound this instruction helpful.
john from seaford, VA
Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers, Socket set
Removed Ice bin from Fridge
Removed all bolts on bin with nut driver...about six
Removed housing...be careful with spring on crusher/cube control rod
Removed C clamp on end of auger with small slotted screw driver and needle nose pliers.
Removed plastic nut on end of auger shaft
Remov
... Read moreed Ice crusher jaws and laid them out in the correct order
Removed Ice propeller and installed new part
Put back together in opposite order
Easy
Read less
Was this helpful?
Thank you for voting!
Lights inside refrigerator not working
137 of 257 peoplefound this instruction helpful.
Clint from Rayville, MO
Really Easy
Less than 15 mins
Screw drivers
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Was this helpful?
Thank you for voting!
Light Would Not Go On In The Refrigerator
62 of 82 peoplefound this instruction helpful.
DANIEL from MINNEAPOLIS, MN
Easy
Less than 15 mins
Screw drivers
First I removed the old lightbulb from the socket and replaced it with a new one to confirm that the bulb was not the problem. I then pryed the socket out with a flat-head screwdriver. I could tell that the socket was anchored in its hole with clips so it was relatively easy to pry it out. Once the socket was out, I disconnected the le
... Read moread wires and ordered a replacement socket kit from Partselect. When the new one arrived, I reconnected the lead wires to it, snapped it back into its hole, screwed in a new lightbulb, and presto!! The light was back on with no further problem. Thank you, Partselect!! A $15.00 part saved me what probably would have been at least a $100. service call and heaven knows what the technician would have told me I needed!!!
My Orders
