This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model...
This water filter is a genuine replacement for bottom-freezer refrigerators that accept a Filter 2. it is certified to remove up to 24 different contaminants which include pharmaceuticals, waterborne ...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your prod...
This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help s...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This door bin is for refrigerators.
The door bin attaches to the inside of the refrigerator door and typically holds jars and bottles.
Follow the instructions in the owner's manual for installing this part.
This part is a replacement refrigerator drive shaft seal for your refrigerator. The drive shaft seal protects the auger motor from water and condensation that may leak down the drive shaft from the ic...
The trivet (also referred to as a door basket) is made mostly of clear plastic, and measures 13 3/8” wide 3 5/8” tall 4 3/4 deep. The trivet attaches to the inside of the refrigerator door, and typica...
$51.82
In Stock
Questions And Answers for WRF736SDAM11
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Danny
May 27, 2022
Bottom freezer becoming very difficult to open. Frost along the right runner and what appears to be a layer of ice underneath the bottom tray.
For model number WRF736SDAM11
Hello Danny, Thank you for the question. This could be an indication the Defrost is not operating. We suggest testing the Defrost Heater. You should get an approximate reading of 10 to 150 ohms on a Multimeter if the Defrost heater is good. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
THE EVAPORATOR MOTOR APPARENTLY FAILED LAST NIGHT. CAN IT BE REPLACED DIY?
For model number WRF736SDAM11
Hello Gerald, thank you for contacting us. The replacement of the evaporator motor, part number PS11755853, is an easy job, and keeping safety standards in mind, is a DIY task. Please watch the attached video for installation instructions.
We look forward to hearing from you if you need assistance placing an order through our 7-days-a-week customer service. We hope this helps!
I have a fridge that has been in storage for around 9 months and we just put it in our house. When we hook it up to the water line and turn the water on it starts leaking out of the light in the ceiling on the water filter side. It was working fine before we put it in the storage unit. I don't want to have to purchase a new fridge, does anyone have any ideas?
For model number WRF736SDAM11
Hi Dillan, thank you for reaching out. We would recommend checking the Water Filter, part number PS11722126, it may have become clogged. If that does not help, we would recommend checking the Water Inlet Valve, part number PS11738056, and Water Tubing, part number PS12711428. If you require assistance placing an order, please contact customer service. We hope that helps!
Water leaking from solenoid at bottom rear corner of refrigerator. This part supplies water to dispenser in door. Can you provide a part number?
For model number WRF736SDAM11
Hello John, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11738056. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
There is a steady slow water leak inside the ceiling case near the water filter. HOw can I gain access to the water line and can the leak be repaired at all? There are no screws or other access ports on the back of the refrigerator and I cannot see any way of removing the inner ceiling plate.
For model number WRF736SDAM11
Hi Irving, thank you for contacting us. We have found a video for your assistance. Good luck with the repair!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Purchased new motor from Partselect.com. When it arrived it came with a new rubber washer that fitted on top of new motor that was not on old motor, that how water got into old motor. However, the instruction sheet did not give info on how to access the proper way to the motor that is the door. Not wanting to damage the freezer door assy.
... Read more called in a tech who made it look easy, but even he had a little problem locating access panel that was directly under the motor in the freezer side of the door. After that it was a piece of cake.
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working.