This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and sho...
This Grease Filter is constructed of Acrylonitrile Butadiene Styrene and is used to trap grease and help eliminate odors from the exhaust air while cooking. It attaches onto the exhaust and is rated ...
This turntable ring in your microwave makes sure that your glass tray rotates smoothly. Located just above the internal floor, it supports the tray so that your food cooks evenly. A broken turntable r...
This mounting plate is sourced directly from the original manufacturer for use with microwaves. It is a metal plate designed to support a microwave by attaching the microwave to the wall studs. If the...
This three-terminal switch fits your microwave door. This part is mostly black in color and is about 1.5 inches with metal terminals. You might need to replace this part if your microwave is not heati...
This door interlock switch is for microwaves.
Door interlock switch prevents the microwave from starting when the door is open.
Because the microwave shielding and interlock switches must be pro...
This diode, or high voltage diode, is used in microwaves. It is an electrical current control device that ensures power flows in one direction and not the other way. If your microwave produces no heat...
The light socket in your microwave houses the light bulb and connects it to the power source. The light bulb will screw into it, so the light bulb will be held in place. Be very careful when installin...
This damper is an authentic OEM replacement assembly used in microwave/range hood combos. It includes the damper door and frame. It is designed to direct the flow of air through the vent duct, and the...
$73.24
In Stock
Questions And Answers for WMH31017HZ2
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
October 4, 2022
the night light does not turn off
For model number WMH31017HZ2
Hello Jerry, thank you for your question. We have researched your model and found that the issue is probably with the Light Socket, part number PS2342199. If you require assistance to place an order, please contact customer service. We hope that helps!
When you start the microwave, there is a rapid clicking sound behind the control pad, then it shuts off. About 3 seconds. Not sure if it’s a relay, magnetron, or the unit is toast….
For model number WMH31017HZ2
Hi Karl, thank you for reaching out. It seems that one or more of the door switches, part numbers PS2361111, PS2361113, and PS10057151, are defective and need to be replaced. If that does not help, we recommend that you check the control board, part number PS16620391. If you require assistance to place an order, please contact customer service. We hope that helps!
The microwaves turn table rotates constant with door open and makes humming noise constantly with door closed and showing code F1E4
For model number WMH31017HZ2
Hi James, thank you for your inquiry. The F1E4 error code means that your main power relay board has an internal short. Try to unplug the microwave for 5 minutes and see if the electronics will reset. If the issue comes back, the main power relay board, part number PS16620391, would have to be replaced. We hope this solves your problem!
.exterior light..below microwave(that lights up stove area) wont turn on.Do i need a new bulb..and if so inst'l instructions please...thx
For model number WMH31017HZ2
Hello Tom, thank you for reaching out. We have concluded that the issue is with the light bulb, part number PS2376034. You may need to replace it to fix the issue. To replace the light bulb, remove the bulb cover screws and open the bulb cover. Remove the bulb and install the new one by reversing the same procedure. Good luck with your repair!
How do i turn off the ring when each program is done?
For model number WMH31017HZ2
Hi Bill,
Thank you for your question. According to your owner's manual, to turn programming tones off, press and hold number pad 1 for 3 seconds until you hear a confirmation tone. Follow the same procedure if you would like to turn the tones back on. We hope this helps! If you have any questions, please let us know.
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the li
... Read moreght bulb so that we do not need a screwdriver to remove the door to get to the light bulb
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 P
... Read morehillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time.
