Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WMH2175XVS7

WMH2175XVS7 Whirlpool Microwave - Overview

Get Parts and Repair Help for WMH2175XVS7

If you know the microwave repair part you need, you can browse the list of all parts on the WMH2175XVS7, or you can search by name or part description. You can also find your part by where it is located on the WMH2175XVS7 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for WMH2175XVS7 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.19

Light Bulb - 40W

This exterior light bulb for your microwave is 40W and has a small screw-in base. To access the exterior light bulb, you will need to remove the panel on the bottom of the microwav...

Order within the next 5 hrs and your part ships today!
$8.83

Charcoal Filter

The charcoal filter in your microwave is designed to improve air circulation and eliminate odors while cooking. If the exhaust fan on your microwave is not working, you may need to replace your charcoal filter. This charcoal filter is located within the intake grille of your microwave, which will need to be unscrewed and opened to gain access to the filter. The manufacturer recommends that you change your charcoal filter every six months. This filter measures 5 inches by 5.375 inches by 0.375 inches. Be sure to measure your current filter to assure correct replacement. This product is sold individually.

Order within the next 5 hrs and your part ships today!
$8.86

Grease Filter

This is a grease filter and the purpose of this part is to be used in conjunction with your ventilation system. Your grease filter will trap grease and help eliminate odors from th...

Order within the next 5 hrs and your part ships today!
$3.42

Light Bulb - 40W

The 40W lightbulb is found in the interior of your microwave, which will need to be replaced if you have noticed the light is no longer coming on after opening the door. The light bulb is clear in color and made of glass. For this installation, you will need a Phillips screw driver and utility knife. Before beginning, make sure to disconnect the power and wait a few minutes. Remove the two screws in the grove vent and set aside and then lift the grill vent forward and pull up to remove. The light bulb should be underneath a panel and may require the use of your utility knife to remove the silicone holding it in place. Line the new bulb up with the socket and screw into place until it is snug.

Order within the next 5 hrs and your part ships today!
$14.22

Glass Cooking Tray

This tray rotates in your microwave ensuring more even temperatures.

Order within the next 5 hrs and your part ships today!
$2.85

Top Mounting Screw

This screw is sold individually.

Order within the next 5 hrs and your part ships today!
$8.99

RING TURN

This support ring sits underneath the glass turntable tray.

Order within the next 5 hrs and your part ships today!
$6.67

Straight Mounting Bracket

Bracket only.

Order within the next 5 hrs and your part ships today!
$18.61

Diode

This diode, or high voltage diode, is used in microwaves. It is an electrical current control device that ensures power flows in one direction and not the other way. If your microw...

Order within the next 5 hrs and your part ships today!
$8.73

Fuse

If your microwave is not turning on it could be due to your fuse needing to be replaced. This part protects the microwave by shutting it off if there is an electrical surge. This fuse is just over an inch long, is metallic on both ends and ceramic in the middle. Before beginning this repair, unplug the appliance and wait a few minutes before starting. Remove the outer cabinet which is held in place with two screws. You will then locate the power cord which will lead you to the fuse holder. Determine if the fuse has blown. Using an ohmmeter, you should be able to figure out if it has blown. A proper reading is zero ohms, if it reads as anything else then your fuse has in fact blown. Simply snap the old fuse out of place and place the new one in.

Order within the next 5 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

light bult needed to be replaced

  • Customer: Deborah from Millersville, MD
  • Difficulty: Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 113 of 163 people found this instruction helpful
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the light bulb so that we ... read more

While attempting to get some from the cabinet above my microwave, a guest accidently pulled on the top grill vent and caused the plastic screw tap to crack and break leaving the grill vent hanging.

  • Customer: Susan K from Lacey, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 72 of 79 people found this instruction helpful
I first went back Lowe's where I purchased my microwave in the hopes they would help in the ordering of the grill vent for my mircrowave. They advised me that they do not order parts and gave me a card of a company to call to order the part. I called the number on the card and was left on hold for 20 minutes then instead of helping me with the part I needed ... read more

Bulb "burnt out"

  • Customer: Joseph from Pembroke, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 62 of 88 people found this instruction helpful
Removed 1 screw, removed "burnt out" bulb and replaced it with new bulb. read more