WM3998HBA (ABLEVUS) LG Washer - Overview

Diagrams for WM3998HBA

See every part. Know exactly what you need.

Parts for the WM3998HBA

$35.80

Water Inlet Valve - Hot

★★★★★

(94)

Part #5220FR2006H

The hot water inlet valve on your washing machine controls the water flow into the washer. This inlet valve has a standard hose fitting inlet and one water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the washer may leak, fill slowly, or not fill at all. To test yo...Read more

Read less

$19.30

Magnetic Door Plunger

★★★★★

(78)

Part #AGM73610701

This magnetic door plunger, also known as the magnet holder, is built for your washer. When you order this part, you will receive the plastic housing and a spring that goes with it. The magnetic door plunger attaches to the inner door panel of the washer. It holds the door open when the washer is not running, and allows the door and tub s...Read more

Read less

$55.29

Tub-to-Pump Drain Hose

★★★★★

(16)

Part #4738ER1002A

This is a tub-to-pump drain hose for a front load washer. The hose features flexible bellows which allow it to expand and contract when necessary. It carries the water from the tub of the washer to the drain pump so the used water can properly empty from the tub. This part is made of rubber, is black in color and measures 13 inches long. ...Read more

Read less

$42.12

Shock Absorber Kit

★★★★★

(5)

Part #383EER3001J

This kit includes 1 shock absorber and 2 pins.

$24.67

Washer Gasket

★★★★★

(7)

Part #4036ER4001B

This is a seal for a washer tub. It creates a seal between the front and rear halves of the washer tub to prevent the appliance from leaking. If you notice leakage between the two sections of the tub, you may need to replace this part. Seals can get dry and brittle over time which compromises the integrity of the part and may cause your a...Read more

Read less

$24.67

Detergent Dispenser

★★★★★

(20)

Part #3891ER2003A

This is a replacement detergent dispenser for your washer. It stores the detergent, and then dispenses it into the washer at the appropriate point in the wash cycle. If the detergent dispenser is broken, or if the detergent is not dispensed during the wash cycle, you may need to replace it. The dispenser is made of blue plastic, and is ap...Read more

Read less

$36.85

Drain Hose Assembly

★★★★★

(3)

Part #5215ER2002G

The drain hose assembly is a genuine OEM assembly supplied directly by LG for use in washing machines. The assembly includes the hose, connector, elbow fitting, and metal clamp. It is responsible for directing wastewater from the washing machine tub to the household drain or plumbing system. It allows the water to exit the washer efficien...Read more

Read less

$21.45

Locking Pin

★★★★★

(2)

Part #4774FR3118B

This is a locking pin, and it works in conjunction with your washer. The part measures to be roughly 3 inches long, and less than an inch wide. The pin is cylindrical, off-white in color, and made entirely of plastic. This part is used to hold the shock absorber on the washing machine. There is a pin used at the bottom and top of the shoc...Read more

Read less

$21.45

Clamp Assembly

★★★★★

(2)

Part #ACA56078801

This is an outer seal clamp designed for use within LG washing machines. This clamp tightens and secures the gasket that seals the washer tub from the door. If your gasket is loose fitting and is not damaged or warped, this clamp is likely worn out and in need of replacing. This clamp is an OEM part and is made entirely of metal, with a s...Read more

Read less

$15.00

Clamp

Part #4861FR3068A

$19.30

BOLT ASSEMBLY

★★★★★

(2)

Part #FAA31690703

This shipping bolt is an OEM part that holds the tub and basket of your washer steady during transport, stopping them from moving around and getting damaged. You will usually find these bolts at the back of the washer, screwed into the frame. This is sold individually, but keep in mind that most washers need two of these bolts.

$130.68

Washer Switch Assembly

★★★★★

(7)

Part #EBF61315802

This is a door lock switch, compatible with various models of LG washing machines. This door lock switch is designed to communicate to the control board when the door of the washer is closed, so the door can lock and allow the washing cycle to safely begin. If your washer is having difficulty locking before it begins its washing cycle, or...Read more

Read less

Questions And Answers for WM3998HBA

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Jim - For model number WM3998HBA

December 7, 2023

The display lights on the control panel are mostly out, can't read any numbers or cycles.

Hi Jim, thank you for reaching out. Based on our understanding, the issue is probably with the display control board, part number PS11771551. We would recommend checking the control board to fix the issue. Good luck with your repair!

$265.35

Printed Circuit Board Assembly

Was this helpful?

Common Symptoms of the WM3998HBA

How this model fails, and the parts that fix it.

Leaking

Fixed by
these parts

Show All

Lid or door won’t close

Does not dispense fabric softener or detergent

Noisy and Marks Left on Clothes

Fixed by
these parts

Show All

Videos related to models starting with WM3998HBA

Watch our pros, then fix it yourself.

Replacing the Magnetic Door Plunger

Replacing the Water Inlet Valve - Hot

Replacing the Shock Absorber Kit

Replacing the Washer Switch Assembly

Replacing the Tub-to-Pump Drain Hose

Replacing the Detergent Dispenser

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Door would not close

157 of 181 people found this instruction helpful.

Omnitech from Warrenville, IL
Really Easy
Less than 15 mins

There is a magnet at the bottom of the door which allows the door to be held ajar when the washer is not in use to allow the tub and gaskets to dry. A tab on the plastic housing which retains the magnet broke which allowed the housing to pull free of the door and stick itself to the machine preventing the door to close. Easy fix to replac ... Read more

Read less

Was this helpful?

leaking tub-to-pump drain hose

52 of 76 people found this instruction helpful.

Leslie from STOWE, VT
Easy
30 - 60 mins
Screw drivers

Pull washer away from wall. Unplug cord and remove drain hose from receptacle. Remove 4 screws holding panel to rear of washer. Squeeze and slide back hose clamps on each end of drain hose and loosen center clamp with screwdriver. Remove old hose. Reinstall new hose in reverse order using existing clamps. Re-install back panel.

Was this helpful?

Water was filling continues even the machine was unplugged

20 of 24 people found this instruction helpful.

Sanjay from HOLTSVILLE, NY
Really Easy
Less than 15 mins
Pliers, Screw drivers, Wrench (Adjustable)

I did repaired while looking at video at your site .thanks to your team ..

Was this helpful?