WM3570HVA (ASSEECI) LG Washer - Overview

Diagrams for WM3570HVA

See every part. Know exactly what you need.

Parts for the WM3570HVA

$35.80

Water Inlet Valve - Hot

★★★★★

(94)

Part #5220FR2006H

The hot water inlet valve on your washing machine controls the water flow into the washer. This inlet valve has a standard hose fitting inlet and one water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the washer may leak, fill slowly, or not fill at all. To test yo...Read more

Read less

$139.65

Water Inlet Valve - Cold

★★★★★

(93)

Part #5220FR2075L

The cold water inlet valve on your washing machine dispenses the cold water and bleach into the washer in the prewash cycle. This inlet valve has a standard hose fitting inlet and 2 water outlets facing 45 degrees to the left. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, t...Read more

Read less

$55.29

Tub-to-Pump Drain Hose

★★★★★

(16)

Part #4738ER1002A

This is a tub-to-pump drain hose for a front load washer. The hose features flexible bellows which allow it to expand and contract when necessary. It carries the water from the tub of the washer to the drain pump so the used water can properly empty from the tub. This part is made of rubber, is black in color and measures 13 inches long. ...Read more

Read less

$24.67

Detergent Dispenser

★★★★★

(20)

Part #3891ER2003A

This is a replacement detergent dispenser for your washer. It stores the detergent, and then dispenses it into the washer at the appropriate point in the wash cycle. If the detergent dispenser is broken, or if the detergent is not dispensed during the wash cycle, you may need to replace it. The dispenser is made of blue plastic, and is ap...Read more

Read less

$42.12

Washer Hose with Bellows

★★★★★

(12)

Part #4738ER1004B

This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The dispenser hose connects the dispenser assembly to the tub. Before beginning the repair, unplug the washer and turn off the water supply. You will need a Phillip...Read more

Read less

$104.33

Door Boot Seal

★★★★★

(10)

Part #MDS47123602

Made from high-quality rubber, this washer door boot gasket creates a watertight seal between the door and tub to prevent leaks. It’s compatible with many LG and Kenmore front-load washers and replaces several older part numbers. A reliable fix for water leakage and odor issues.

$72.00

Washer Tub Bearing, Rear

Part #4280EN4001F

Tub Bearing

Part #4280FR4048L

The tub bearing supports the spin basket shaft at the back of the washing tub. If your washing machine will not spin, is leaking water, or if there is a loud screeching noise during the wash cycle, there could be an issue with the tub bearing. This genuine OEM replacement bearing has a 3-inch outer diameter, and is used to help the tub sp...Read more

Read less

$36.85

Drain Hose Assembly

★★★★★

(3)

Part #5215ER2002G

The drain hose assembly is a genuine OEM assembly supplied directly by LG for use in washing machines. The assembly includes the hose, connector, elbow fitting, and metal clamp. It is responsible for directing wastewater from the washing machine tub to the household drain or plumbing system. It allows the water to exit the washer efficien...Read more

Read less

$44.95

Shock Absorber Assembly

★★★★★

(2)

Part #ACV72909503

This friction damper assembly in your washer stabilizes the tub or drum. It absorbs the movements and vibrations during the spin cycle to keep the machine steady and reduce noise. It connects the tub to the cabinet. If the assembly is broken, your washer may be excessively noisy or shaky. This genuine OEM replacement part is sold individually, and separately from the shock absorbers.

$21.45

Clamp Assembly

★★★★★

(2)

Part #ACA56078801

This is an outer seal clamp designed for use within LG washing machines. This clamp tightens and secures the gasket that seals the washer tub from the door. If your gasket is loose fitting and is not damaged or warped, this clamp is likely worn out and in need of replacing. This clamp is an OEM part and is made entirely of metal, with a s...Read more

Read less

$36.85

LOCKER,HOOK

★★★★★

(5)

Part #MFG63099101

This hook locker, commonly referred to as a door lock strike is specially designed for LG washers. It is a small, metal plate that is attached to the washer door. When the door is closed it engages with the door lock mechanism to keep the door securely shut while the washer is running. If it is damaged, worn down, or corroded, it will be ...Read more

Read less

Questions And Answers for WM3570HVA

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

David - For model number WM3570HVA

August 25, 2023

Washing drum will not spin and throws an Le code. Seems like it could be a faulty Hall Senor. Do you have this part or any experience with this problem?

Hi David, thank you for the question. An LE error code is displayed when the tub fails to spin. The error code indicates that the motor can not operate properly because you've overloaded the washing machine, or a foreign object is stuck in the tub. We would recommend you reset your washer by unplugging it for 5 to 10 minutes. If this does not help, you may need to change the motor rotor position sensor, part number PS16556422. We hope this solves your problem!

$55.29

SENSOR ASSEMBLY

Was this helpful?

Common Symptoms of the WM3570HVA

How this model fails, and the parts that fix it.

Leaking

Fixed by
these parts

Lid or door won’t close

Does not dispense fabric softener or detergent

Marks left on clothes

Fixed by
these parts

Show All

Videos related to models starting with WM3570HVA

Watch our pros, then fix it yourself.

Replacing the Water Inlet Valve - Hot

Replacing the Water Inlet Valve - Cold

Replacing the Door Boot Seal

Replacing the Washer Hose with Bellows

Replacing the Washer Switch Assembly

Replacing the Tub-to-Pump Drain Hose

Replacing the Detergent Dispenser

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

leaking tub-to-pump drain hose

52 of 76 people found this instruction helpful.

Leslie from STOWE, VT
Easy
30 - 60 mins
Screw drivers

Pull washer away from wall. Unplug cord and remove drain hose from receptacle. Remove 4 screws holding panel to rear of washer. Squeeze and slide back hose clamps on each end of drain hose and loosen center clamp with screwdriver. Remove old hose. Reinstall new hose in reverse order using existing clamps. Re-install back panel.

Was this helpful?

Inlet valve leak

34 of 37 people found this instruction helpful.

John from Northport, NY
Really Easy
30 - 60 mins
Pliers, Screw drivers

Followed directions on the video and went like a charm. Very impressed with service and video

Was this helpful?

Replaced the washer door gasket

31 of 33 people found this instruction helpful.

Matt from ROYAL OAK, MI
A Bit Difficult
1- 2 hours
Screw drivers

Followed the videos on line. However instead of buying the $75 spring expansion tool I used two zip ties. One at each end of the spring to create loops for my index fingers to pull the spring apart. Needed a second person to help hold the ring in place at 3&9 position.

Was this helpful?