WLC-1 Walbro Engine - Overview

This OEM choke friction ball measures approximately .125-inches in diameter and is made of high-quality steel. This choke friction ball works within the carburetor of an engine, along with the choke friction spring, to provide tension onto the choke lever for precise user control. If the ball becomes warped, damaged, or worn-out, it can c...Read moreause the level of tension for the choke lever to diminish, ultimately affecting the choke mechanism functionality. If you notice the choke lever is loose, difficult to adjust, or simply does not hold, the friction ball is likely damaged or warped. To prevent any sort of issues with the friction ball in the future, make sure to perform regular cleaning and maintenance on the choke mechanism and apply a small amount of lubricant such as silicone grease or engine oil when necessary. To replace the choke friction ball in your engine, disconnect the spark plug on your equipment and access the choke mechanism ? which may require you to disassemble covers, filters, or other components to access it. Once you locate the ball, use a screwdriver or set of pliers to remove the ball from its housing and clean the housing before installing the new ball. You can then install the new ball, along with the rest of the choke mechanism, and test to see whether its movement has improved

This choke friction spring is sourced from the original equipment manufacturer for use in carburetors. It is a small, coiled metal spring that helps to maintain the desired position of the choke by providing the right amount of tension. If the spring wears down, breaks, or is dislodged from its position, you will notice difficulties start...Read moreing the engine, rough idling, and lower power output. To remove the spring, use a pair of needle nose pliers to detach it from the choke lever/plate. Install the new friction choke spring, and ensure it is adequately tensioned to keep the choke in place. Move the choke lever to confirm that the plate opens and closes freely, before reassembling your equipment.

This is an original Walbro replacement part. The metering lever pin is designed by the manufacturer for use in carburetors. This part is made of metal, and is used to secure the metering lever and allow it to pivot as needed. You may require a screwdriver and pliers or a punch set when replacing this item. This part is sold individually.

This is a genuine OEM sourced component which is specially made for use with Walbro carburetors commonly installed on lawn and garden equipment. Its purpose is to ensure that the fuel that goes through the unit is free of dust and other harmful contaminants. Unfortunately, over time it will wear out and may get clogged eventually requirin...Read moreg a replacement. Keep in mind this high-quality fuel inlet screen is made of durable material and is sold individually. Make sure to refer to the appropriate diagrams of your model for the correct location and application of this part.

It is a genuine item that is supplied by the original equipment manufacturer for use with Walbro carburetors which are commonly installed on a variety of lawn and garden equipment. This is an identical replacement for a missing or a faulty inlet needle that was originally installed on a new unit. Please make sure to refer to the appropria...Read morete diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality inlet needle valve is made of durable metal and is sold individually.

Repair Kit