WL506208 (2003) Campbell Hausfeld Compressor - Overview

This replacement regulator/manifold manifold assembly is specially manufactured for Campbell Hausfeld air compressors. The manifold kit consists of the manifold, the regulator, two pressure gauges, two quick-disconnects, and the nipple that connects the entire assembly to the air tank. The manifold kit will solve any problems related to a...Read more cracked manifold assembly, as well as any problems with the regulator. To complete this repair job correctly you may need : Phillip's screwdriver, hex drivers, long-nosed pliers, wrenches and heavy-duty wire cutters. • Depressurize the tank • Remove the manifold cover • Remove the pressure hose • Remove the pump assembly from the tank • Remove the manifold • Remove the manifold nipple • Transfer the safety valve • Install the new manifold kit • Secure the the pump assembly • Reinstall the hose • Reattach the manifold cover • Ensure everything is connected and test the compressor

It is a genuine OEM part that is made for Campbell Hausfeld air compressors. The unloader valve is an important component which allows a user to safely drain the air from the tank. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement to ensure your unit operates properly. Note, this high-quality unloa...Read moreder includes multiple parts however it is sold as an individual component. Check the owner\\\'s manual and the diagrams of your model to ensure the correct installation and application. You will need a wrench set and pliers to perform this repair.

This genuine OEM air compressor intake filter assembly is designed to protect the compressor pump by filtering dust and debris from incoming air. It features a durable plastic housing with a replaceable paper filter element and is suitable for both indoor and outdoor use. The assembly threads directly into the compressor intake and can be...Read more mounted vertically or horizontally, making replacement straightforward. Installing a clean, properly functioning intake filter helps maintain airflow, reduce wear on internal components, and support reliable compressor performance.

It is an authentic manufacturer sourced replacement head gasket that is specially produced for Campbell Hausfeld air compressor pumps. The purpose of this gasket is to create an air-tight seal between the head and the cylinder case. Over time gaskets tend to get compressed and deteriorate eventually requiring replacement to maintain peak ...Read moreperformance. Please note this part is made from high quality composite material and it is sold individually.

Sourced directly from the manufacturer, this plug is an exact replacement part for a variety of air compressors. This part is sold individually, not as part of a kit or assembly. It is gold, made of metal, and will be found on the pressure switch. This part will leak when it has become defective and will need to be replaced if it is dam...Read moreaged or worn. When you install the part, apply Teflon tape to the threads before tightening it in place. You will need a wrench to complete this repair. Customers rate this repair as Easy.

This is a genuine Campbell Hausfeld replacement drain valve, sold individually. When using an air compressor, moisture naturally condenses inside the tank. If this water is left sitting for too long, it can lead to internal rust and damage. The drain valve allows you to release this built-up moisture easily. It's especially important to d...Read morerain your tank after each use—particularly if you tend to leave air in the tank for extended periods. Regular draining helps extend the life of your compressor and maintain its performance. Be sure to open the valve regularly to prevent water buildup and potential tank corrosion.

1/4

This genuine manufacturer-sourced part is specially designed for use with Campbell Hausfeld and Ridgid air compressors. The purpose of a pressure switch is to control when the compressor should start and stop building up pressure. There are several reasons it could be leaking air, unfortunately, over time components will wear out and may ...Read morebegin to fail eventually requiring a replacement. Note, this pressure switch cuts in at 120psi and cuts out at 150psi. Keep in mind this high-quality part is sold individually, Please refer to the appropriate diagrams of your model for the correct location and application of this pressure switch.

This is an Original Manufacturer Approved replacement part used on Portable Air Compressors. The piston is a central component of an engine. It both provides compression within the engine, as well as transfers the energy from combustion to the crankshaft (which creates rotation). This Assembly includes the Piston/Piston Rod, Cylinder and...Read more a Screw. Please note manufacturer does not include the main bearing with this replacement Piston Assembly. A good quality high speed bearing marked 6203 will work. The 6203 Bearing is Part #MJ108004AV. Replacing the piston assembly is not the simplest repair, but it is definitely something you can do yourself. You will need a Flathead or Phillips Head Screwdriver to remove the cover and a set of Sockets and Wrenches for the rest of the repair.

This genuine OEM replacement nipple is designed for use in air compressors, serving as a critical connector between the pressure switch, the tank, and the regulator. A damaged or corroded nipple can lead to air leaks and inconsistent pressure, affecting overall performance. To check for leaks, apply soapy water to the fittings around the ...Read morepressure switch and watch for bubbles. If replacement is necessary, the process typically involves disassembling the pressure switch. Begin by draining the tank using the valve at the bottom, then remove the coupler from the regulator and unthread the nipple. Access the wire connections by removing the pressure switch shroud, and carefully note the position of each wire before disconnecting them—starting with the motor wire, followed by the cord wires and ground wires. Remove the strain relief, pressure gauge, and the airline connecting the check valve to the switch. Finally, unthread the pressure switch from the tank nipple and remove the nipple itself. When reassembling, it is recommended to use thread tape to ensure a proper seal. This replacement part is sold individually.

This genuine OEM part is specially designed for Campbell Hausfeld air compressors. It is an important component which provides a tight seal between connected parts. If the part is worn, damaged or missing, this will provide an identical replacement for the original gasket that was installed on a new unit. To ensure the correct repair proc...Read moreedure, check the diagrams for your model. Note, this high-quality part is made of durable material and is sold as an individual item. A screwdriver and a wrench set will be needed to take apart and reassemble the equipment when performing this repair.

This replacement gasket is specially designed for use with Campbell Hausfeld air compressors. It is a high-quality component which is supplied by the original manufacturer and it is sold individually. The gasket provides an air-tight seal for the cylinder, over time gaskets tend to wear out and crack eventually requiring a replacement to ...Read moremaintain peak performance. Please make sure to check appropriate diagrams of your model for correct location and use of this gasket. It is an authentic item which is made of durable composite material and it is sold individually.