WKHC152HWA (ABWEEUS) LG Washer Dryer Combo - Overview

If you notice your washing machine is leaking water from the top of the transmission, it might be due to the gasket being damaged or worn down. When replacing your gasket, consider replacing your tub bearings at the same time. The gasket (or seal) is located at the back of the outer tub of your washing machine. To access this part you wil...Read morel need to pull the top off of the appliance by releasing the screws holding it in place. This part is sold individually, is black in color, and measures 3 inches in diameter.

The tub bearing supports the spin basket shaft at the back of the washing tub. If your washing machine will not spin, is leaking water, or if there is a loud screeching noise during the wash cycle, there could be an issue with the tub bearing. This genuine OEM replacement bearing has a 3-inch outer diameter, and is used to help the tub sp...Read morein smoothly and to stop the washing machine from shaking during the cycle. NOTE: This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly at the same time.

This hook locker, commonly referred to as a door lock strike is specially designed for LG washers. It is a small, metal plate that is attached to the washer door. When the door is closed it engages with the door lock mechanism to keep the door securely shut while the washer is running. If it is damaged, worn down, or corroded, it will be ...Read moreunable to engage with the locking mechanism and prevent your washer from closing or staying shut. You may notice that your washer will not start or stops running mid-cycle. You will need to replace the door strike to fix the washer.

This part is the replacement connector hose or clean-out drain hose for your washer. It is black in color and is sold individually. The connector hose drains water out of the washer if the drain cycle is not working. If the hose breaks, it will not be able to drain the water properly, and you may experience a water leak. Be sure to discon...Read morenect your washer from the power source, as well as the water source before you begin this repair. This is an OEM part sourced directly from the manufacturer.

This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from your washer. Before beginning this repair, make sure the power and water sources to your washer are shut off. To access the pump housing, open the pump filter cov...Read moreer, pull out the drain hose, remove the old plug and replace it, first draining the remaining water from the drain hose.

This washer drain pump assembly is a genuine OEM component designed to remove water from the drum at the end of each wash cycle. Engineered for durability and quiet operation, it helps maintain proper drainage and supports overall appliance performance. Common symptoms of a failing pump include slow or incomplete draining, water leaks, an...Read mored unusual noises during the drain cycle. This replacement part is compatible with select washing machine models and supersedes previous versions. Installation should be performed with the appliance unplugged, and model compatibility should be verified before purchase.

This heater assembly is a vital component for LG washing machines, designed to heat water to the correct temperature for optimal cleaning performance. It features an integrated thermistor (sensor probe) that accurately monitors and regulates water temperature throughout the wash cycle. Built for durability and efficiency, this genuine LG ...Read moreOEM part ensures a precise fit and reliable operation in compatible washer models. Please note: the design has been updated, so a new wire harness may be required for installation. Always disconnect power and follow your appliance’s manual for proper setup.

This drain pump assembly removes wastewater during appliance operation, supporting proper drainage and preventing standing water. Designed for reliable performance, it helps maintain efficient operation. Replacing a failing pump can resolve drainage issues or abnormal noise.

This pressure switch monitors internal pressure levels to ensure the appliance operates under safe conditions. Accurate sensing supports proper function and cycle progression. Replacing a faulty pressure switch restores dependable system response.