WHDSR315DAWW General Electric Washer Parts & Repair Help | PartSelect
Models > WHDSR315DAWW

WHDSR315DAWW General Electric Washer - Overview

Manuals & Care Guides for WHDSR315DAWW

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(30)
PartSelect #:PS271100
Manufacturer #:WH1X2727
The tub dampening straps support the wash tub and reduce vibration by keeping the tub at the center of the cabinet. If your washer shakes and moves, or is making a loud banging noi...
$7.33
In Stock
(2)
PartSelect #:PS268493
Manufacturer #:WH01X10106
Sold individually.
$5.75
In Stock
(41)
PartSelect #:PS1517844
Manufacturer #:WH49X10042
The agitator coupler connects the agitator to the agitator shaft. Common symptoms of a damaged coupler include: a grinding sound during the wash cycle, the washer refusing to agita...
$12.62
In Stock
(36)
PartSelect #:PS890597
Manufacturer #:WH41X10096
The drain hose is black in color and made of flexible material. This is a part for your top-load washer. The hose measures 57 inches long. This part moves the water out of the wash...
$17.94
In Stock
(11)
PartSelect #:PS270835
Manufacturer #:WH1X2117
The timer knob clip on your washing machine connects the timer knob to the control panel. If your timer knob is damaged or will not stay in place, you may need to replace the clip....
$4.50
In Stock
(29)
PartSelect #:PS8768445
Manufacturer #:WH23X10030
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. If you notice that your washing machine will...
$72.24
In Stock
(92)
PartSelect #:PS1482519
Manufacturer #:WH43X10034
This does not come with the fabric dispenser - must order separately or use original part.
$45.38
In Stock
(23)
PartSelect #:PS268451
Manufacturer #:WH01X10061
This timer knob or control knob assembly is designed for a washing machine, and comes with a retaining clip. It attaches to your timer dial and allows you to turn the timer. The ma...
$11.52
In Stock
(6)
PartSelect #:PS270803
Manufacturer #:WH1X2026
This V-shaped drive belt is 29 1/2 inches long x 1/2-inch-wide, and fits both front-load and top-load washing machines. When belts are worn or frayed, they are known to make noise....
$8.90
In Stock
(15)
PartSelect #:PS4704237
Manufacturer #:WH02X10383
The main tub seal is located between the transmission and the outer tub. Its the primary water seal in the outer tub for the transmission-shaft. If your washer is leaking during th...
$15.97
In Stock
Questions and Answers for WHDSR315DAWW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

One of eight clips broke off of the agitator assy allowing the assembly to come lose on heavy loads.

  • Customer: Paul from Carneys Point, NJ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 666 of 709 people found this instruction helpful
I replaced the coupling by only having to remove one bolt with a socket wrench. Once replaced I installed the new assy over the coupling making sure ro align the splines then pushing down until the assy snapped into place. Easy. read more

Washing Machine was not draining water from tub.

  • Customer: Gerald from Midlothian, VA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers
  • 294 of 313 people found this instruction helpful
1. Drained the wash tub by taking the drain hose from the back of the washing machine and dropping it below the tub - water flowed out of hose a lot easier than trying to suck water out of tub using a pump (tried this on the first time I tried to fix washer). (Washing machine on 2nd floor of house and didn't want water running on floor)
2. Removed the... read more

broken dampening strap and loose agitator

  • Customer: molly from laguna niguel, CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Socket set
  • 273 of 289 people found this instruction helpful
first remove the front washer cover by finding the two pressure clips that hold it to the top lid. gently push the putty knife into the clips one at a time. this will raise and separate them from the front panel. the panel will tilt forward and u can now remove it from the bottom clips by sliding it up and out. to open the top cover u remove the two 1/4 in s... read more