This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
Affresh Washing Machine Cleaner includes three slow-dissolving tablets that help remove odor-causing residue from inside the washer. Suitable for all washer brands, including high-efficiency (HE) machines, the formula is also septic-safe. Place one tablet directly in the empty wash basket and run the Clean Washer cycle, or use a normal cycle with hot water. Use monthly or every 30 wash cycles for best results.
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
This noise filter helps protect your washer’s electronics by smoothing out the power supply and blocking sudden surges that could damage the control board. It’s a behind-the-scenes part that plays a big role in keeping your machine running reliably, especially during power fluctuations. If your washer is acting up or the control panel isn...Read more’t responding like it should, a faulty noise filter might be the culprit. Swapping it out is a smart move to prevent bigger issues down the line. Just make sure to check your washer’s manual to confirm it’s the right fit before installing.
This valve regulates the flow of water or gas within the appliance to ensure proper operation. Built for reliability, it supports precise control and consistent performance.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carolyn - For model number WFW3090JW0
August 23, 2022
Tech says the CCU is shorted
What is a CCU
What is the part number
Hi Carolyn,
Thank you for your question. The CCU is referring to the central control unit. The part number listed under your model number for the CCU is PS16660585. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
RV size front loading washer goes into delay mode when powered on. Tried to cancel by turning off, but once it was turned on again it went to the delay mode again. Tried shutting down main power and turned back to n . Washer stuff lol does the same thing. Purchased with RV in 2020.
Hello Brigitte, thank you for contacting us. Based on the description you have provided, we would recommend checking the electronic control board, part number PS12723945, to fix the issue. We hope this solves your problem!
Hello Angela, thank you for your inquiry. We have concluded that the issue is with the control board, part number PS12723945. You may need to check it to solve the problem. Glad to be of assistance!
It powers on and can switch through modes however it does not fill with water. We have water valve open and faucet next to it has plenty of water pressure. Any suggestions on how to fix?
Hi Jerry, thank you for contacting us. We believe your washer is having this problem because of the faulty water level pressure switch, part number PS11775288. It senses and controls the water level in the washer. You may need to replace it to fix the issue. We hope this sorts out your problem!
Will not turn on or off
Lights flashing across the panel
Hi Todd, thank you for reaching out. Check for any loose connections or damaged wires. If they are fine, the issue could be with the control board, part number PS16763177. It manages the washer's functions such as filling, washing, draining, and spinning. You may need to replace it to fix the issue. We hope this sorts out your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Scratches in Surface
83 of 227 peoplefound this instruction helpful.
Michelle from Richardson, TX
Really Easy
Less than 15 mins
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Was this helpful?
Thank you for voting!
Leaking water inlet hoses.
4 of 6 peoplefound this instruction helpful.
Helen from NASHUA, NH
Really Easy
30 - 60 mins
Removed the old hoses and screwed on the new hoses.
Was this helpful?
Thank you for voting!
Replace the timer board in the Washer
2 of 2 peoplefound this instruction helpful.
Kevin from SIMPSONVILLE, KY
A Bit Difficult
30 - 60 mins
Nutdriver
The washer had to be put on its side to gain access to the timer board. The board is located on the right side below the main tank. There are two screws holding the board into the washer.
My Orders
