Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WFU0912DW0

WFU0912DW0 Westinghouse Freezer - Overview

Get Parts and Repair Help for WFU0912DW0

If you know the freezer repair part you need, you can browse the list of all parts on the WFU0912DW0, or you can search by name or part description. You can also find your part by where it is located on the WFU0912DW0 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the WFU0912DW0

[Viewing 4 of 4]

Manuals & Care Guides for WFU0912DW0

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$9.91

Adjustable Leveling Foot - Black

This part could be found underneath a fridge, dryer, or freezer. The original foot may be cracked, broken, or perhaps missing altogether. If you notice the appliance is uneven to t...

$7.82

Single Gasket Retainer Clip

This genuine OEM freezer gasket retainer clip is used on refrigerator freezers, and connects the inner door panel and door gasket to the outer door panel. The gasket is the rubbery strip that seals the space around the edge of the door to keep warm air out of the freezer. When the gasket is not working properly, you may notice an excessive frost buildup or reduced cooling. If the gasket is hanging loosely from the door, the issue could be with the retainer, or the clip fastening the retainer to the gasket, and it should be replaced.

$5.58

SCREW

Sold Individually.

$8.97

Shelf Support - Left Side

This is a shelf support for the left side of a freezer. It is used to help support the inside of the shelf from both sides. *Please note: right and left side of shelf support are sold separately. If the shelf in your fridge is unstable, replacing this part could be the solution. Make sure to unplug the refrigerator or freezer from the power source before beginning this replacement project and safely store food. Follow the instructions in the diagram provided by the manufacturer for further instructions and guidance.

$9.05

Shelf Support

This is a shelf support for freezers. It is used to help hold the inside of the shelf from both sides (left and right.) Please note: right and left side of shelf support are sold s...

$8.72

Touch Up Paint - White

This is white touch up paint for refrigerators, microwaves, ranges, dryers, and freezers. It is used to cover, or touch up, nicks and scratches on the appliance from wear and tear. It is an 18ml bottle that contains paint and a small brush for easy application. It is a little over 2 inches tall. This is an OEM part that is sourced directly from the genuine manufacturer, and is meant to be an exact match to the color of the appliance. If the appliance is not white, please see other colors such as almond or black.

$5.67

RAMP

$9.42

Filter - Drier

A filter-drier in a refrigerator has two essential functions. The first is to absorb system contaminants, such as water, which can create acids. The second is to provide physical filtration. This means trapping moisture, small metal chips, and dirt found in the refrigerant gas. If your refrigerator motor is constantly running, but the refrigerator is not getting cold, the issue could be due to a damaged or faulty filter-drier. Faulty filter-driers are sometimes the cause for abnormal freezer compartment temperatures and partially frosted evaporators. This filter-drier is approximately 11 inches long. Remember to disconnect the power from your refrigerator before beginning this repair.

$5.71

BEARING-HINGE

$8.57

SUPPORT-REAR SHELF

This part is found in freezers. The stud may have broken over time and may no longer be supporting the shelf. If your shelf is not staying in place or you are not able to adjust heights, it may be due to the support being broken. To complete this repair, you will need to open the fridge and remove the drawer and the shelf. To remove the old stud, you will need a 3/4-inch wrench to twist it off. The new part should push into place and will need to be turned with your wrench to be secured into place.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Plastic shelf supports broken

  • Customer: shari from west sand lake, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 3 of 19 people found this instruction helpful
Needed to remove both left and right broken (plastic) supports and reinsert the new parts. Not hard at all...worked like a charm! read more