Models
>
WFMC530YUC
WFMC530YUC ((15)) Bosch Washer - Overview
Sections of the WFMC530YUC
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Cold Water Inlet Valve
PartSelect #: PS8713229
Manufacturer #: 00422244
This valve is used in washers and it is known as the washer inlet valve. This specific valve is used to control the flow of cold water into your washing machine. If your washer is leaking, if it will ...
$53.38
In Stock
Drain Pump - 120V 60Hz
PartSelect #: PS8714879
Manufacturer #: 00436440
This drain pump, also referred to as a drain pump motor assembly, is designed for use with front load washers. This pump is used to remove the water from your washing machine during the washing cycle....
No Longer Available
Hot Water Inlet Valve
PartSelect #: PS8713230
Manufacturer #: 00422245
This valve is designed for use with washers. Inlet valves on washers are what control the flow of water into your appliance, this valve is used to control the flow of hot water into your washer. If yo...
$46.07
In Stock
Washer Door Boot Gasket
PartSelect #: PS8732872
Manufacturer #: 00667487
This door boot is for washers. Door boot forms a seal between the wash tub and the door, preventing leaks.
$83.15
In Stock
Shipping Bolt with Spacer
PartSelect #: PS8697774
Manufacturer #: 00175724
Front-loading washing machines use a suspension system to support the tub during the wash cycle. This suspension system is only designed to handle a certain amount of movement, so when you are transpo...
$18.12
In Stock
Washer Drive Belt
PartSelect #: PS8722578
Manufacturer #: 00491680
This drive belt is for washers. Drive belt connects the drive motor to the drive system in the washer to spin the basket.
No Longer Available
Shock Absorber
PartSelect #: PS8729758
Manufacturer #: 00642112
Shock absorbers keep the washer from vigorous shaking during it's cycles. They are sold individually.
$61.53
In Stock
Questions And Answers for WFMC530YUC
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the WFMC530YUC
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
We got E13 code, meaning "something" is in the pump--needs clean out. We cleaned out and it worked only once more:( A small plastic peice was cracked and let water and "junk" into the pump--a total loss.
My husband took off the back of the washer and disconnected the hose that connected the pump to the main drum. He has strong fingers--did it that way--but really you need a pillars. After putting it all back together we got another weird code--E29 and the door wouldn't lock. But after turning everything off and waiting 30 minutes, the
... Read more
genius machine just suddenly reset itself and started working correctly. No problems since and we've done about 30 loads since then. While on the phone with Bosch, trying to learn how to clear the new code, I heard only, "We only give information to certified repairmen and home repairs are definitely not covered by the warranty." Who cares? I'm now a satisfied mom who is actually washing clothes after only two days waiting for shipping--IF I could get any repairman to my house this month I'd be surprised and not for cheaper than the price of a new washer! Thank you for your great parts:)
Read less
Parts Used:
-
Sheriann from GLENN, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
11 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The inlet valve on my washer was leaking
Turned off the water to the washer. Took the top off of the washer. Used pliers to loosen the rings holding the hoses to the valve. After the hoses were removed from the valve I popped out the old inlet valve. I put the new inlet valve in place and put the hoses and rings back on. Secured the top of washer back on the washer turned the wa
... Read more
ter back on. No leak present.
Read less
Parts Used:
-
Donna from HUNTERSVILLE, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
6 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
E:12 error code displayed, frequently had to reset washer during cycle
Shut off water supply to washer, unplugged from power. Removed two Torx screws holding the top panel of the washer on (screws are on the back). Slid top back, then lifted up and off. Located cold water inlet valve. Squeezed hose clams with needle nose pliers and slid the two hoses off valve. Disconnected wire harness (look for push t
... Read more
ab) from valve. With a little work figured out how to pop valve out of its opening. Installed new valve in its place and re-connected all hookups. Reattached top to washer, plugged and in reconnected water. Ran a test load, then another - no more errors!
Read less
Parts Used:
-
Ian from HUDSON, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!