EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖
Sign In | Create Account
| Your Account

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos
Keep typing for more specific results...

Parts Departments

Top Model Types View All

Expert Repair Videos

Symptoms

Troubleshoot like a pro using your model's symptoms

View symptoms

Model Number Locator

Find your model number to unlock guaranteed fit

Find my model number

Articles & Guides

How to Fix a Samsung Dryer 3C Error Code - PartSelect

If a Samsung dryer is displaying a 3C error code, there is a communication issue with the motor and control board. In this article we’ll cover how to fix this issue.

How to Reset Your Bosch Dishwasher - PartSelect.com

A step-by-step guide to resetting a Bosch dishwasher. Learn what errors and issues a reset can fix, how to do a soft reset, and how to do a hard reset.

How to Fix an F11 Code on a Frigidaire Oven - PartSelect.com

Learn how to clear the F11 error code on your Frigidaire oven and replace the keypad overlay and electronic control board with our easy DIY how-to guide.

 See more articles & guides

WFMC3301UC (13) Bosch Washer - Overview

Diagrams for WFMC3301UC

See every part. Know exactly what you need.

Parts for the WFMC3301UC

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cold Water Inlet Valve – Part Number: 00422244
$61.07
In Stock
Cold Water Inlet Valve
★★★★★
★★★★★
(16)
Part #00422244
This valve is used in washers and it is known as the washer inlet valve. This specific valve is used to control the flow of cold water into your washing machine. If your washer is leaking, if it will not fill, if it is taking a long time to fill, or if it will only operate with hot water the dual inlet valve made be restricted or damaged. If you find this valve is damaged or restricted it will need to be replaced. Before you replace this part, or any other part on your washer, make sure the water supply has been shutoff and ensure the appliance is unplugged.
Read less
Bellow Assembly – Part Number: 00667489
$91.13
In Stock
Bellow Assembly
★★★★★
★★★★★
(14)
Part #00667489
This is a bellow assembly, also known as a door boot gasket kit, and it is designed for use with front load washers. This gasket acts as the main seal between the door of the washing machine and the wash tub. This seal might wear out over time, or it might be damaged, resulting in water leaking from around the door during the wash cycle. If you notice leaks coming from the door it may be time to replace the door boot gasket on your washer. This kit includes the seal, the front and rear spring clamps, and installation instructions.
Read less
Drain Pump - 120V 60Hz – Part Number: 00436440
No Longer Available
Drain Pump - 120V 60Hz
★★★★★
★★★★★
(8)
Part #00436440
This drain pump, also referred to as a drain pump motor assembly, is designed for use with front load washers. This pump is used to remove the water from your washing machine during the washing cycle. When the spin speed of the tub is maintained for a specific period of time the drain pump is then activated. If your washing machine will not drain you may have an issue with the drain pump, it may be damaged, clogged, or faulty. If you find an issue with your drain pump you will need to replace it. This drain pump assembly includes the drain pump motor, impeller, pump housing, and pump filter.
Read less
Hot Water Inlet Valve – Part Number: 00422245
$43.62
In Stock
Hot Water Inlet Valve
★★★★★
★★★★★
(7)
Part #00422245
This valve is designed for use with washers. Inlet valves on washers are what control the flow of water into your appliance, this valve is used to control the flow of hot water into your washer. If your washer is leaking, if it is only washing in cold water, if it is not filling at all, or if it is filling slowly you will need to check the inlet valves. If you find this inlet valve is clogged, restricted, or damaged in any way you will need to replace it. Before starting repair work you need to shut off the water supply, this helps prevent any flooding or mess while replacing the valve in your washer.
Read less
Leveling Leg – Part Number: 00610643
$15.35
Special Order
Leveling Leg
Part #00610643
Sold individually.
Shipping Bolt with Spacer – Part Number: 00175724
$16.64
Special Order
Shipping Bolt with Spacer
Part #00175724
Front-loading washing machines use a suspension system to support the tub during the wash cycle. This suspension system is only designed to handle a certain amount of movement, so when you are transporting or moving the machine you will need shipping bolts to hold the tub in place. Using shipping bolts will help you limit any potential damage that can be done to the suspension system during transport. This shipping bolt is comprised of three pieces, the bolt, the washer and the sleeve. You will need four of these bolts to hold the tub of your front load washer in place for moving.
Read less
Sleeve – Part Number: 00422204
No Longer Available
Sleeve
Part #00422204
WASHER BOOT SPRING CLAMP – Part Number: 00648264
$14.09
In Stock
WASHER BOOT SPRING CLAMP
Part #00648264
SLEEVE – Part Number: 00422174
$7.68
In Stock
SLEEVE
Part #00422174
Shock Absorber – Part Number: 00642112
$70.48
In Stock
Shock Absorber
★★★★★
★★★★★
(1)
Part #00642112
Shock absorbers keep the washer from vigorous shaking during it's cycles. They are sold individually.
Washer Drive Belt – Part Number: 00491680
No Longer Available
Washer Drive Belt
Part #00491680
This drive belt is for washers. Drive belt connects the drive motor to the drive system in the washer to spin the basket.
CLAMP – Part Number: 00644646
$14.72
In Stock
CLAMP
Part #00644646
View More

Common Symptoms of the WFMC3301UC

How this model fails, and the parts that fix it.

Leaking
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Will not drain
Fixed by
these parts
Fixing
Show All
Water Filling Issues
Fixed by
these parts
Fixing
Fixing
Show All

Videos related to models starting with WFMC3301UC

Watch our pros, then fix it yourself.

Replacing the Cold Water Inlet Valve

Replacing the Cold Water Inlet Valve

Replacing the Drain Pump - 120V 60Hz

Replacing the Drain Pump - 120V 60Hz

View More
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
We got E13 code, meaning "something" is in the pump--needs clean out. We cleaned out and it worked only once more:( A small plastic peice was cracked and let water and "junk" into the pump--a total loss.
13 of 16 people found this instruction helpful.
  • Sheriann from GLENN, CA
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
My husband took off the back of the washer and disconnected the hose that connected the pump to the main drum. He has strong fingers--did it that way--but really you need a pillars. After putting it all back together we got another weird code--E29 and the door wouldn't lock. But after turning everything off and waiting 30 minutes, the genius machine just suddenly reset itself and started working correctly. No problems since and we've done about 30 loads since then. While on the phone with Bosch, trying to learn how to clear the new code, I heard only, "We only give information to certified repairmen and home repairs are definitely not covered by the warranty." Who cares? I'm now a satisfied mom who is actually washing clothes after only two days waiting for shipping--IF I could get any repairman to my house this month I'd be surprised and not for cheaper than the price of a new washer! Thank you for your great parts:)
Read less
Was this helpful?
Thank you for voting!
The inlet valve on my washer was leaking
7 of 7 people found this instruction helpful.
  • Donna from HUNTERSVILLE, NC
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Turned off the water to the washer. Took the top off of the washer. Used pliers to loosen the rings holding the hoses to the valve. After the hoses were removed from the valve I popped out the old inlet valve. I put the new inlet valve in place and put the hoses and rings back on. Secured the top of washer back on the washer turned the wa ter back on. No leak present.
Read less
Was this helpful?
Thank you for voting!
E:12 error code displayed, frequently had to reset washer during cycle
7 of 8 people found this instruction helpful.
  • Ian from HUDSON, NY
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Shut off water supply to washer, unplugged from power. Removed two Torx screws holding the top panel of the washer on (screws are on the back). Slid top back, then lifted up and off. Located cold water inlet valve. Squeezed hose clams with needle nose pliers and slid the two hoses off valve. Disconnected wire harness (look for push t ab) from valve. With a little work figured out how to pop valve out of its opening. Installed new valve in its place and re-connected all hookups. Reattached top to washer, plugged and in reconnected water. Ran a test load, then another - no more errors!
Read less
Was this helpful?
Thank you for voting!
View More