EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

WFC18M4AW0 Frigidaire Freezer - Overview

Diagrams for WFC18M4AW0

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Run Capacitor – Part Number: 5304464438
$56.05
In Stock
Run Capacitor
★★★★★
★★★★★
(10)
Part #5304464438
The run capacitor helps the compressor kick on and off while maintaining a constant temperature in your fridge and freezer. You may need to replace your run capacitor if your refrigerator or freezer section will not start, if they are too warm, or if your refrigerator has become too noisy. Replacing the run capacitor is a relatively easy project. For this repair you will only need a 1/4 inch nut driver and needle nose pliers. Remember to disconnect the power and water supply line to the unit before you begin this repair. For full step by step instructions, simply click on the video below.
Gasket Retainer Clip Kit - 24 Pieces – Part Number: 5303922007
$70.35
In Stock
Gasket Retainer Clip Kit - 24 Pieces
★★★★★
★★★★★
(2)
Part #5303922007
This gasket retainer clip kit is for freezers. There are 24 pieces in this kit. The clips are what secure the gasket and liner to the freezer lid. The clips are white in color and made of plastic. If you notice frost build up in your freezer or that is it is not maintaining its temperature, this might be because the retainer clips have broken, and this has caused the gasket to become loose. This is a genuine OEM part that is obtained right from the manufacturer, ensuring a quality repair.
SCREW – Part Number: 216858001
$19.68
In Stock
SCREW
Part #216858001
Sold Individually.
Compressor Start Relay – Part Number: 216008900
No Longer Available
Compressor Start Relay
Part #216008900
GASKET-DOOR – Part Number: 216481211
$150.37
In Stock
Filter - Drier – Part Number: 5303305677
$39.82
In Stock
Filter - Drier
Part #5303305677
A filter-drier in a refrigerator has two essential functions. The first is to absorb system contaminants, such as water, which can create acids. The second is to provide physical filtration. This means trapping moisture, small metal chips, and dirt found in the refrigerant gas. If your refrigerator motor is constantly running, but the refrigerator is not getting cold, the issue could be due to a damaged or faulty filter-drier. Faulty filter-driers are sometimes the cause for abnormal freezer compartment temperatures and partially frosted evaporators. This filter-drier is approximately 11 inches long. Remember to disconnect the power from your refrigerator before beginning this repair.
Drain Plug – Part Number: 297013600
No Longer Available
Drain Plug
★★★★★
★★★★★
(2)
Part #297013600
This OEM drain plug in your freezer is a small white circular part located at the bottom. Its purpose is to seal the front hole of the cabinet, which is used to drain water during defrosting. If you notice water leaking or pooling at the bottom, your drain plug may be deformed or broken. Failure to replace the broken plug can result in water accumulation, ice buildup, and the growth of bacteria or mold. To remove the existing drain plug from your appliance, no tools are needed. You can simply pull it out of its slot. Please keep in mind that this plug is sold individually.
COLD CONTROL KIT – Part Number: 5304496560
$59.34
Special Order
COLD CONTROL KIT
★★★★★
★★★★★
(3)
Part #5304496560
This part helps maintain the desired temperature.
Optional Freezer Handle – Part Number: 3017618
No Longer Available
Optional Freezer Handle
Part #3017618
Recessed Handle – Part Number: 297034202
No Longer Available
Recessed Handle
Part #297034202
Compressor Mounting Grommet – Part Number: 218513300
$52.75
In Stock
Compressor Mounting Grommet
Part #218513300
Lid Hinge Assembly – Part Number: 297322000
$89.56
In Stock
Lid Hinge Assembly
Part #297322000
This is a hinge for your freezer. This part supports the opening and closing of your appliance door, allowing the user easy access. If your current hinge is causing your door to stick you may need to replace it. This piece is white in color,measures 11 1/2 inches long, by 3 1/4 inches wide and is a genuine OEM part.

Common Symptoms of the WFC18M4AW0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Clicking sound then within a minute clicking again, not cooling.
81 of 97 people found this instruction helpful.
  • Melvin from Semmes, AL
  • Easy
  • Less than 15 mins
UNPLUG REFRIGERATOR. Carefully remove relay from the side of the compressor. You shouldn't need a tool to do this, if it is hard you can gently pry the edge with a flat head screw driver just to loosen. Unplug white and red wires from relay, noting that the white wire goes in the hole with a #2 stamped beside it. Shake old relay, if it r attles like a baby rattler then it's most likely the problem. Replace wires into the new relay and plug back into the compressor.
Was this helpful?
Thank you for voting!
buttom of refrigerator not cold
23 of 29 people found this instruction helpful.
  • Giuseppe from brick, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
unplug it, pulled compressor start relay,which i thing it was the problem, but i replace bolt, very easy.
Was this helpful?
Thank you for voting!
Door gasket needed to be replaced.
24 of 32 people found this instruction helpful.
  • Arnold from Quincy, IL
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
I removed all of the expandable pins that held the gasket and the inner door panel, and removed the old gasket from the inner door panel. The new gasket was then placed around the edges of the inner panel. While holding the gasket and panel in the proper location, the expandable pins were inserted into the mounting holes, finishing the installation.
Was this helpful?
Thank you for voting!