EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

WF361BVBEWRA1 Samsung Washer - Overview

Diagrams for WF361BVBEWRA1

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Inlet Hose - 5 FT – Part Number: WP89503
$19.30
In Stock
Inlet Hose - 5 FT
★★★★★
★★★★★
(5)
Part #WP89503
This hose can handle hot or cold water and is five feet long.
Hex Head Bolt – Part Number: DC60-40137A
$16.45
In Stock
Hex Head Bolt
★★★★★
★★★★★
(1)
Part #DC60-40137A
This part is used for the shaft on the rear of the tub and is sold individually. The head bolt is part of the spider arm assembly, and they are generally changed at the same time. If you are replacing the entire spider arm assembly, make sure you order as many hex bolts as you will need. The spider arm assembly contains 6 of these hex bolts. The hex bolt or spider arm assembly may need to be replaced if you notice that your inner tub is going out of balance. The hex bolt measures 1.5 by 0.5 inches.
Outer Seal Clamp – Part Number: DC97-04973B
$14.25
On Order
Outer Seal Clamp
★★★★★
★★★★★
(5)
Part #DC97-04973B
This is an outer seal clamp for the washer door boot of your Samsung washing machine. This clamp tightly seals the boot of the drum within the door of the washer to prevent leaks. This clamp is made of metal and features a spring in the middle, but over time can be worn down or break, and result in water leaking out of the washing machine and into your home. Replacing this clamp will require a screwdriver, pliers, and safety gloves. This clamp is an OEM part that comes individually, without any other parts or accessories.
Water Valve – Part Number: DC62-30314K
$94.30
In Stock
Water Valve
★★★★★
★★★★★
(2)
Part #DC62-30314K
One solenoid valve for hot water
Tapping Screw – Part Number: 6002-000213
$6.40
In Stock
Tapping Screw
Part #6002-000213
Washer Door Diaphragm – Part Number: DC64-00802B
$179.95
In Stock
Washer Door Diaphragm
★★★★★
★★★★★
(4)
Part #DC64-00802B
This is a door diaphragm, also commonly known as a door boot seal, for a washer. The boot is fitted between the washer door and the tub to prevent leaking while the appliance is in use. It is made of rubber and is gray in color. Your boot can tear if the washer is overloaded. Alternatively, age and detergents can wear and dry out the boot which causes it to become brittle and weak. This may cause your washer to leak, and you may need to replace the boot. This is an authentic replacement part from the original manufacturer.
Washer Water Valve – Part Number: DC62-30312J
$122.85
In Stock
Washer Water Valve
Part #DC62-30312J
Drain Pump – Part Number: DC31-00054D
$55.07
In Stock
Drain Pump
★★★★★
★★★★★
(2)
Part #DC31-00054D
This is the drain pump assembly for various models of Samsung washing machines. The drain pump is used to remove any water from the washer after it has completed its washing cycle. If your washer still has water left in the tub after it has finished washing this drain pump assembly is likely bad defective or worn out and in need of replacing immediately. It is important that you do not use your washer with a bad drain pump as that could lead to further damage to your washer clothes or home. This drain pump assembly is approximately 4.5 inches tall and will require tools such as a wrench and screwdriver to access and replace. This drain pump is sold as an individual OEM part and does not include any securing screws.
Fixer Tub Assembly – Part Number: DC97-14489R
$56.14
In Stock
Fixer Tub Assembly
★★★★★
★★★★★
(2)
Part #DC97-14489R
Shipping bolts are installed through the back of the washing machine, and hold the wash tub and basket in place while your washer is being transported. The tub suspension holds the tub correctly in place during the wash, rinse, and spin cycles. If this suspension is damaged during shipping, the tub can shake and move, tilt to one side, or spin incorrectly. This could lead to the suspension or motor failing. When moving your washer, it is suggested that you insert the shipping bolts back into place before moving the machine. This part is also called a washer transit bolt. Remember that this part is sold separately, and to check your model to see how many you require.
Washer Bolt Assembly – Part Number: DC97-02412A
$23.63
In Stock
Washer Bolt Assembly
Part #DC97-02412A
Assembly BOLT;SWF-P12,MOTOR/
Shock Damper – Part Number: DC66-00531B
$52.95
In Stock
Shock Damper
Part #DC66-00531B
Tapping Screw – Part Number: 6002-000520
$6.40
In Stock
Tapping Screw
Part #6002-000520
This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.

Common Symptoms of the WF361BVBEWRA1

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
OE error code, water keeps flowing during spin cycle, softener dispenser left half full of water, clothes wet after washer stops
3 of 3 people found this instruction helpful.
  • Gary from Peachtree City, GA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Found a repair video of a Samsung washer that looks like mine (9 years old). Removed two screws from the back of the washer, slid the top a few inches toward the front and lifted it off. Disconnected the two double electrical connections, the two rubber tubes from the solenoids, the cold water hose from the back and removed the two scre ws holding the valve in place. Installed the new valve by reversing those steps, slid the top back into place and secured it with the two screws and viola (as Kelly Bundy would say)! The washer now functions normally. I'm waiting for my next water bill to arrive to see whether the sudden increase in usage decreases to its normal amount. We have three adults and four small children in the household so the washer is constantly in use.
Was this helpful?
Thank you for voting!
Leaking water inlet hoses.
4 of 6 people found this instruction helpful.
  • Helen from NASHUA, NH
  • Really Easy
  • 30 - 60 mins
Removed the old hoses and screwed on the new hoses.
Was this helpful?
Thank you for voting!
Old hot water inlet hose had budge at both ends.
2 of 5 people found this instruction helpful.
  • Jimmy from MEMPHIS, TN
  • Very Easy
  • Less than 15 mins
  • Pliers
Turn water off at the inlet valve of hose you are replacing. Disconnect inlet hose the washer and let water drain out in a bucket. Then remove old hose. Replace new hose to inlet valve then washer . Use pliers to tighten both ends. Turn on water to check leaks at both ends of hose.
Was this helpful?
Thank you for voting!