EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

WF337AAWXAC Samsung Washer - Overview

Diagrams for WF337AAWXAC

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer Door Lock Latch – Part Number: WP8182634
$79.50
In Stock
Washer Door Lock Latch
★★★★★
★★★★★
(24)
Part #WP8182634
This washer door lock and switch assembly is a critical safety and control component for front-loading washing machines. It secures the door during wash and spin cycles, preventing accidental opening and ensuring the appliance operates only when properly latched. The integrated interlock switch communicates with the washer’s control system to verify door status, helping prevent cycle interruptions and operational errors. This model features a four-lead switch for precise functionality and is compatible with a wide range of front-load washers. Replacing this part can resolve issues such as a door that won’t close, won’t open, or won’t lock, as well as a washer that fails to start. Installation should be performed with the appliance unplugged and may require basic tools.
Washer Door Diaphragm – Part Number: DC64-00802A
$169.95
In Stock
Washer Door Diaphragm
★★★★★
★★★★★
(3)
Part #DC64-00802A
This door boot (part number DC64-00802A) is for washers. Door boot DC64-00802A forms a seal between the wash tub and the door, preventing leaks. Unplug the washer before installing this part. Wear work gloves to protect your hands.
Door Lever – Part Number: DC66-00326A
$15.35
In Stock
Door Lever
Part #DC66-00326A
This is a door lever strike for Samsung washing machines. This part is used to latch and hold the washer door to the washer door frame when it is closed. If the door strike for your washer is currently broken, damaged, or not properly catching, this must be replaced for your door to close securely. This door strike is a genuine OEM part made of plastic and is sold individually, meaning it will need to be installed with the 2 screws securing the current door strike.
Fixer Tub Assembly – Part Number: DC97-07448D
$44.70
In Stock
Fixer Tub Assembly
Part #DC97-07448D
This is a shipping bolt designed by and for Samsung washing machines. This shipping bolt is installed in the back of the washer before transporting it to securely fasten the tub of the washer so it does not move. This bolt measures approximately 6 inches long and is normally installed with multiple other bolts. To install this bolt, remove the protective cap on the back of your washer and carefully screw it into the appropriate hole. Depending on your model, you may need other shipping bolts of different lengths, so check your user manual for further information. This OEM shipping bolt is sold individually, so consider how many you need before ordering.
Drawer Housing Assembly – Part Number: DC97-08800A
$57.00
In Stock
Door Hinge – Part Number: DC61-03202A
$57.15
On Order
Door Hinge
Part #DC61-03202A
Hose Drawer – Part Number: DC67-00051Q
$21.17
Special Order
Hose Drawer
Part #DC67-00051Q
Power Supply Cord – Part Number: DC96-00757A
$92.84
In Stock
Power Supply Cord
Part #DC96-00757A
Leg Assembly – Part Number: DC97-00920N
$54.53
Special Order
Leg Assembly
Part #DC97-00920N
Drawer Housing Assembly – Part Number: DC97-07125Q
No Longer Available
Drawer Housing Assembly
Part #DC97-07125Q
Drawer Panel – Part Number: DC97-12611A
No Longer Available
Drawer Panel
Part #DC97-12611A
Heater-Heating Element – Part Number: DC96-01417B
No Longer Available
Heater-Heating Element
Part #DC96-01417B

Common Symptoms of the WF337AAWXAC

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
front load washer latch replacement
198 of 242 people found this instruction helpful.
  • James from Vilonia, AR
  • A Bit Difficult
  • Less than 15 mins
  • Nutdriver, Screw drivers
1. remove the three screws from the top backside of the top panel
2. push the top panel to the rear 1/8 to 1/4 inch
3. lift/rotate top panel from rear to front, set aside.
4. remove the three wire connectors from latch.
5. use #15 Torx to remove the three screws from the latch.
6. remove and replace part using to p opening.
7. reverse order to finish.
Was this helpful?
Thank you for voting!
Door lock was in the locked position and door could not close
67 of 76 people found this instruction helpful.
  • Suryakant from Cortlandt Manor, NY
  • Easy
  • 15 - 30 mins
  • Screw drivers
I bought a new door lock for 132 dollars (item number PS2037196).

Ultimately you have to get to the inside of the machine where the door lock is located in order to see if you will need this door lock that I bought.

DISCONNECT POWER FROM MACHINE.

First take off the top by taking off the 2 screws on the bac k of the machine.

Second take off the control panel, I believe there are about 5 or 6 screws for that.
(there's also a screw when you open up the detergent compartment on the bottom left- also, a lever must be pushed in order for the compartment to come off- it MUST be taken off).

Third unscrew the top of the front white plate.. there should be a 5 or 6 screws for that.
You don't need to take off the entire front plate.

Finally unscrew 3 screws that hold the door lock in place .. make sure your hands is in the machine- the back of door lock to catch the lock when you're on the last screw.

Gently take out the door lock from the side with the cables attached by holding the white metal door open (it bends).

Try to pull on the bottom of the door lock (its a manual release). If it doesn't release you need to buy a new door lock like I did... if it does release then you don't need a door lock and just reassemble.
(Note: You can also try plugging in the machine and THEN pulling down on the manual release. When I tried this the door lock just vibrated and nothing happened so I bought a new door lock.)

If you have the new door lock continue here:

Take out all 3 cables on the old door lock by pressing on the corresponding clips.

Attach the new door lock with the correct cables. Assemble machine back together.

Thats it.
Was this helpful?
Thank you for voting!
The Washer became unbalanced and broke the latch on door
32 of 44 people found this instruction helpful.
  • Glenn from Las Vegaas, NM
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Screw drivers
Had to take the entire front of the washer off to replace the door latch.
Was this helpful?
Thank you for voting!