This authentic Dishwasher Upper Rack Adjuster Kit with white wheels is a kit made up of primarily plastic and metal components, which will require a screwdriver to install. This kit comes with all the...
$47.83
In Stock
Order within the next 11 hrs and your part ships today!
The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
$7.71
In Stock
Order within the next 11 hrs and your part ships today!
This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dish...
$66.15
In Stock
Order within the next 11 hrs and your part ships today!
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking,...
$10.04
In Stock
Order within the next 11 hrs and your part ships today!
Also known as rack adjuster. Sold individually.
This is an original part from KitchenAid, Kenmore, Whirlpool, Jenn-Air, and Maytag for use with Dishwashers. The dishrack adjuster arm positioner clip...
$38.25
In Stock
Order within the next 11 hrs and your part ships today!
Sold individually.
This dishrack adjuster is for dishwashers.
Dishrack adjuster lets you change the height of the dishwasher's upper rack.
Wear work gloves to protect your hands when installing this part.
$46.08
In Stock
Order within the next 11 hrs and your part ships today!
The tine row on your dishwasher rack divides the rack into columns to keep your kitchen items in place during the washing cycle. If you notice that one or more of the tines on your current tine row is...
$67.25
In Stock
Order within the next 11 hrs and your part ships today!
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$11.80
In Stock
Order within the next 11 hrs and your part ships today!
This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
$64.02
In Stock
Order within the next 11 hrs and your part ships today!
This filter works with the water pump in your dishwasher. It prevents debris from entering the pump and causing damage. As a result, the filter can occasionally become clogged or damaged, and will nee...
$58.02
In Stock
Order within the next 11 hrs and your part ships today!
Questions And Answers for WDT730PAHB0
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
May 8, 2023
the dishwasher is filling, emptying and dumping the soap but the Wash Cycle is not circulating water. How do I determine if the wash pump is bad?
For model number WDT730PAHB0
Hi Thomas, thank you for reaching out. Based on our understanding of the issue, we would suggest you check the continuity of the circulation pump. To test the continuity of the circulation pump, set the multimeter on the lowest resistance. Attach one probe to one terminal and the other probe to the remaining terminal. If you get a reading between 10 to 100 ohms, it is working fine. If not, you need to replace the circulation pump motor, part number PS12070585. We hope this solves your problem!
Dishwasher wont start or reset , Did the 123 123 123 no codes just F- E- !
Dishwasher will run like a test after 123 is done , and everything seams
to work ! Also turned power off for 6 hrs !
For model number WDT730PAHB0
Hello Carl, thank you for reaching out. Based on the description that you have provided, we would recommend replacing the control board, part number PS12704681, to fix the issue. We hope this information helps!
I need to replace a part of the handle to this model number.
For model number WDT730PAHB0
Hi Stephanie,
Thank you for your question. The handle is sold as one unit. The handle comes in different colors. The part number for the black-stainless steel handle is PS12349515. The part number for the stainless steel handle is PS12584083. The part number for the white door handle is PS12346475. The part number for the black door handle is PS12346226. If you need the studs to fasten the handle onto the door, the part number listed for it is PS12347745. The part number listed for the screw that secures the stud is PS11723187. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Lawrence
March 29, 2022
My dish washer will not hot dry
For model number WDT730PAHB0
Hi Lawrence,
Thank you for your question. If your dishwasher is not drying the dishes, there are some parts that you will need to check to see which one is causing the issue. You will need to check the heating element, the high limit thermostat and the rinse aid on the dispenser. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
We went to use it but it won't start even though there is electricity/power going to it. What do we need to check/replace? Thanks
For model number WDT730PAHB0
Hello Gladys, thank you for contacting us. We recommend checking the power cord, part number PS358548, and ensuring it is not damaged. Also, a blown thermostat, part number PS11743423, can also cause this problem. If this does not help, the issue is probably related to the control board, part number PS12704681. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
Trial and error. The instructions from Whirlpool included with the part had minuscule pictures so it was hard to follow. The written instructions were good. But "a picture is worth a thousand words." Eventually it worked. The metal replacement part is much better the the plastic original. Not a good reflection on Whirlpool.