EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

WD-1243RHD LG Washer - Overview

Diagrams for WD-1243RHD

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Water Inlet Valve - Hot – Part Number: 5220FR2006H
$35.80
In Stock
Water Inlet Valve - Hot
★★★★★
★★★★★
(94)
Part #5220FR2006H
The hot water inlet valve on your washing machine controls the water flow into the washer. This inlet valve has a standard hose fitting inlet and one water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the washer may leak, fill slowly, or not fill at all. To test your valve, unplug the washer when the symptom occurs. If the washer continues to fill, then your inlet valve is defective. This part is approximately 3 inches long x 3 inches wide.
Locking Pin – Part Number: 4774FR3118B
$21.45
Special Order
Locking Pin
★★★★★
★★★★★
(2)
Part #4774FR3118B
This is a locking pin, and it works in conjunction with your washer. The part measures to be roughly 3 inches long, and less than an inch wide. The pin is cylindrical, off-white in color, and made entirely of plastic. This part is used to hold the shock absorber on the washing machine. There is a pin used at the bottom and top of the shock absorber. This model is sold individually. If your washing machine is experiencing an above-average amount of shaking and moving this part may be the reason.
BEARING,BALL – Part Number: 4280EN4001A
$72.00
In Stock
BEARING,BALL
★★★★★
★★★★★
(2)
Part #4280EN4001A
This ball bearing reduces friction and supports smooth rotation of moving components. Proper bearing function minimizes noise and wear. Replacing a worn bearing restores quiet, efficient operation.
Pressure Switch Assembly – Part Number: 6601ER1006E
$72.00
In Stock
Washer Thermistor – Part Number: 6322FR2046C
$24.67
In Stock
Sensor Assembly – Part Number: 6501KW2001A
$49.50
Special Order
Inlet Valve Assembly – Part Number: 5220FR2075C
$74.08
On Order
Inlet Valve Assembly
★★★★★
★★★★★
(1)
Part #5220FR2075C
This water inlet valve assembly is a genuine replacement part that controls the cold water flow into your front-load washer, helping ensure proper filling and preventing leaks. A worn or faulty valve can lead to issues like slow filling, water not entering the drum, or leaks during operation. Installing a new valve helps restore reliable wash performance and consistent water control. Remember to unplug the washer and turn off the water supply before replacing the part, and check your model number to make sure it’s the correct fit.
BEARING,BALL – Part Number: MAP61913714
$53.20
On Order

Common Symptoms of the WD-1243RHD

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Water was filling continues even the machine was unplugged
20 of 24 people found this instruction helpful.
  • Sanjay from HOLTSVILLE, NY
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers, Wrench (Adjustable)
I did repaired while looking at video at your site .thanks to your team ..
Was this helpful?
Thank you for voting!
Water leaking on the floor under the washer.
9 of 9 people found this instruction helpful.
  • Danny from OAK HILLS, CA
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Unplug the washer! Turn off the HOT water valve. Remove the hot water hose at the connection on the back of the washer. Remove the two Phillips head screws holding the top of the washer. Slide the lid toward the rear until you feel it disengage, then lift it off, setting it aside.
Unplug the electrical connector on top of the hot wat er valve (just pulls off).using pliers compress the hose clamp, slide it away from the hot water valve and pull the hose off the valve fitting(it will have some water remaining so lift it up and secure it to the brace above the hoses).
Remove the two phillips head screws that hold the valve in place. Pull the valve toward the front of the washer to remove it and compare it to the new valve.
To install the new valve, reverse all steps insuring tight water hose clamp and electrical connection. Install hot water hose, plug it in and turn on water. Test run and check for leaks. Unplug it and reinstall top.
Was this helpful?
Thank you for voting!
w/d repeatedly fills with water during warm or hot loads
5 of 5 people found this instruction helpful.
  • kevin from WASHINGTON, DC
  • Very Easy
  • Less than 15 mins
  • Screw drivers
E. Z. hardest part (which isn't hard) was moving the appliance to reach the back, then putting the appliance back into place. the actual repair (swapping out valve) took less time than that to do.
Was this helpful?
Thank you for voting!