Models
>
WCG97US6DS00
WCG97US6DS00 Whirlpool Cooktop - Overview
Sections of the WCG97US6DS00
[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Knob
PartSelect #: PS11756643
Manufacturer #: WPW10594481
This is a genuine burner control knob replacement. The burner control knob allows you to control the size of the flame coming from your cooktop burner. It is approximately two inches in diameter, and ...
$43.10
In Stock
HEAD, BURNER (LEFT FRONT & RIGHT FRONT)
PartSelect #: PS11745754
Manufacturer #: WP8286815
$70.46
In Stock
Questions And Answers for WCG97US6DS00
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shelia
February 18, 2020
I need to see instructions on how to install the cook top
For model number WCG97US6DS00
Hello and thank you for writing.
We would be happy to do some research to find you the correct instructions. However, we need your model and serial numbers of the unit itself and the brand name to locate any information on this. Model numbers can be short or long and could have a mixture of numbers and letters. We hope this helps. Please contact us anytime if you require further assistance. We are looking forward to your response.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Iris
February 20, 2020
Need knobs for my stove top stove
For model number WCG97US6DS00
Hello, Thank you for your question. Here is the knob you will need to order- Part #: PS11756643. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Not quite right
The knob was ordered from the original knob and it should have fit. It was the right color but was too small to fit valve on stove. Also, it didn't have any markings on the rim to identify start, lo, high etc. After returning knobs three times I was determined I was not going to return another one if I could make this one fit.I used pliers to squeeze the valve a tiny bit and then the knob fit. I put it on the 5th burner which I rarely use so it doesn't matter if it isn't marked. If I did have to use it I could just judge by the flame if it was at the right setting for me.After having this range for only a couple of years or so I have decided that I wouldn't order another one like it if I needed a new stove. There are a couple other things I didn't like about it so add them all up and opinion has been formed.I do have to say that this company has been wonderful about helping me out though.
Parts Used:
-
Theresa from PEMBROKE, MA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
12 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken control knob.
-
Joe from YOUNGSTOWN, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas explosion due to bad Gas Pressure Regulator
First step is to turn gas off to cook top and also disconnect power to the unit. Than using a crescent wrench disconnect the gas line going to the unit from the Regulator. Than again using the crescent wrench disconnect the regulator from the bottom of the unit. Next remove the nipple that connects the gas line to the regulator from the old unit. Apply new pipe dope to the threads and screw it into the new one and tighten down. Next install the regulator to the unit and install the gas line to the regulator. once done with the install you can now plug the unit in and turn on the gas. You are now ready to use the cook top again
Parts Used:
-
Charles from Buena Park, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench (Adjustable)
0 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
