WA-130-1 Walbro Engine - Overview

This repair kit also known as a carburetor rebuild kit is sourced from the original manufacturer for use in small and outdoor power equipment. This kit includes a pump cover gasket to prevent fuel leaks from the carburetor fuel pump section; a diaphragm gasket to seal the diaphragm in the carburetor; a metering diaphragm gasket to seal th...Read moree metering diaphragm which controls the fuel flow within the carburetor; an inlet needle valve gasket to provide a seal for the inlet needle valve which controls the fuel flow into the carburetor; a metering lever gasket to seal the metering lever; and a welch plug to seal small holes and passages in the carburetor body. The kit also includes reeds a needle valve a needle lever and air filter. These components are critical for maintaining proper fuel delivery preventing fuel leaks and ensuring optimal performance for the carburetor. If your equipment is experiencing hard starting rough idling reduced power output and leakages this kit is designed to provide all the parts you need to restore your carburetor in one convenient package.

This is a Genuine OEM rebuild kit designed for Walbro Carburetors. This kit contains all the necessary Gaskets and Diaphragms needed to rebuild your carburetor. If your engine runs sluggish or it dies shortly after starting it, you may need to rebuild your carburetor. Replacing these items you would need a Screwdriver and Pliers.

This authentic OEM metering diaphragm assembly is housed within the carburetor of your lawn and garden equipment. Positioned between the carburetor body and the fuel pump, it regulates fuel delivery and maintains the air-fuel ratio within the engine. It has a self-adjusting vacuum system and responds to the amount of fuel being drawn into...Read more the engine. When the engine runs at higher speeds, more fuel is pulled in and the diaphragm compresses. As a result, the pin in the center of the diaphragm pushes against the metering level and lifts the regulator inlet needle, letting additional fuel flow from the pump into the reservoir. If the assembly malfunctions, you may experience engine stalling, rough idling, or notice fuel odor, pooling, or dripping around the carburetor area. To remove the metering diaphragm, refer to your user guide for instructions on locating and accessing the carburetor. This typically involves removing the fuel pump cover screw and pump cover, followed by the fuel pump diaphragm and gasket. Remember to blow through the external pulse hole on the body casting and remove the filter screen before proceeding to remove the four screws securing the metering diaphragm plate and the metering diaphragm itself. Please note that this replacement part is sold individually.

This is a genuine Walbro replacement part. The needle spring is commonly found in Walbro carburetors, connected to the idle needle. Please be aware that there are different springs used in the machine. Refer to the parts diagram to be sure of ordering the correct part. This item is made of metal, and is sold individually. You may need a screwdriver to replace this part.

This is an authentic component which is supplied directly from the original equipment manufacturer for use with lawn and garden equipment. It is an identical replacement for a missing or a faulty welch plug that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and ap...Read moreplication of this hardware. Keep in mind this high-quality plug is made of durable metal and is sold individually.