VTX691-600902A Tecumseh Engine - Overview

This screw, also known as a shoulder bolt, is a genuine OEM replacement part for your lawn mower. This metal screw holds the starter grille in place against the rewing starter on your lawn mower. It requires a wrench to be loosened or tightened.

The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers and a screwdriver. If broken due to wear/fatigue/damage, there may be a fuel leak and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

The fuel line is a rubber hose that is responsible for allowing the fuel tank to supply the carburetor and various engine components with fuel. This fuel line is designed to be compatible with various types of lawn equipment and is an authentic OEM part. Because it interacts with gas and oil frequently, it will eventually become brittle a...Read morend crack and need to be replaced. To replace it, you will need to drain the fuel from your equipment, remove the clamps securing the ends of the line, and then swap out the old line for the new, before installing the clamps back. Make sure to check the fuel line frequently for cracks and damage to prevent any leaks from harming your equipment and to maintain its health and performance.

This spark plug cover is supplied directly from the original equipment manufacturer. The rubber and metal component is often used in snowthrower engines, and is sold individually. The spark plug cover is fitted over the spark plug wire connection, providing protection. A screwdriver and pliers may be required for the removal and replacement.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with lawn and garden equipment. It is an identical replacement for a missing or a damaged screw that was installed on a new unit. This is a standard hardware which has multiple applications, please make sure to refer to the appropriate diagra...Read morems of your model for the correct location and application of this part. Keep in mind this high-quality screw is made of durable metal and is sold individually.

This rubber O-ring is a genuine OEM part that is designed for use with various outdoor power equipment models and is sold individually. O-rings are used to seal connections between parts and because of the nature of this O-ring contacting gas and oil, over time it will become brittle and less effective, or crack. When this happens, you wi...Read morell need to replace the part, and this one is a guaranteed fit. This O-ring is typically attached to an oil fill tube for measuring the level of oil in your equipment, to help create the necessary seal that prevents the cap from becoming loose and dirt from entering the tube.

This is a genuine Tecumseh part for use with Lawn and Garden Equipment Engines. The fuel line supplies gas from the tank to the carburetor. The most common reason for replacing the fuel line is when the engine is leaking fuel. This part is sold individually. The tools that you will need to replace the fuel line is a 5/16 inch socket or nut driver and pliers.