My Orders
VT611900 Campbell Hausfeld Compressor - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$6.40
In Stock
Ferrule
Part #ST085200AV
Designed for use in compressors, this genuine replacement part is used to provide a seal and prevent leaks. It is red, made of rubber, is not part of a kit or assembly, and is sold individually.
When this part is worn, you will notice leaks from your machine, and it will need to be replaced. As with most rubber seals, this part is known...Read more to wear with regular use of your compressor, and will no longer be able to properly seal when it needs to be replaced. It is found at the bottom of the air tank, and you will need a wrench to complete this repair.
Customers rate this repair as Easy.
Read less
$20.76
In Stock
Flapper Valv
Part #VS001800AV
This is an authentic part that is supplied directly from the original equipment manufacturer for use with Craftsman Air Compressors. The exhaust flapper valve attaches on the valve plate under the cylinder head. The most common reasons for replacing the flapper valve is if there is poor performance, or the air leaks out of the intake air ...Read morefilter while the unit is running, damaged/sticking valves is a common issue when you have low compression, and can also cause the motor/engine to stall and too much pressure in the pump's crankcase. This part is sold individually. Here is a list of tools that are needed to install the flapper valve are a screwdriver, socket wrench, and a wrench.
Read less
$67.62
In Stock
Flapper Valve .015 Thick
Part #VS001801AV
This replacement flapper valve is a high quality item that is sourced from original equipment manufacturer for use with Campbell Hausfeld air compressors. This part is secured under the cylinder head helping to control the fuel-air mixture admitted to the cylinder. As the piston rises in the cylinder a vacuum is created in the crankcase b...Read moreeneath the piston. This part is made from durable metal and it is sold individually.
Read less
$7.66
Special Order
Axle Bolt
Part #ST033400AV
This part is an OEM from Campbell Hausfeld. The axle bolt is compatible with many air compressors, and is sold individually. The metal bolt fastens the wheel to the base of the tank, providing movement to the device. A wrench and pliers are needed for the removal and replacement.
$15.64
In Stock
Oil Seal
Part #ST021600AV
This is an authentic manufacturer sourced replacement part which is specially designed for use with Campbell Hausfeld Air Compressors. The purpose of the oil seal is to prevent oil from leaking between the crankshaft and crankcase opening. When replacing this part make sure that the compressor is unplugged and the air is bleed from the ta...Read morenk. This part is made from high-quality rubber material and is sold individually.
Read less
$325.48
In Stock
$11.16
In Stock
Bearing Cap Gasket
Part #XA003200AV
This is an authentic part is sourced directly from the original equipment manufacturer. The bearing cap gasket is commonly found in Craftsman air compressors. The purpose of this component is to provide a tight seal between connected parts. Please check the appropriate diagrams of your model for the exact location and the correct application of this part. Note, one durable cap gasket is included.
No Longer Available
Check Valve
Part #CV201400SJ
This part is an OEM from Campbell Hausfeld for use with Air Compressors. The check valve lets pressurized airflow into the tank and prevents air from flowing back into the pump. The most common reason for replacing the check valve is if it is stuck open. This part is sold individually. The tools that you will need to replace the check valve is an adjustable wrench and a 7/16 wrench.
$4.08
Special Order
3/8 Inch Set Screw
Part #ST026200AV
This is an authentic Campbell Hausfeld replacement part, sourced from the original manufacturer for use with air compressors. The special set screw is commonly used to secure the pump's flywheel. This set screw is available as an individual replacement part, please see model diagram for associative parts.
$20.61
In Stock
Gasket Hd. Top Plt
Part #XA007100AV
This genuine manufacturer-sourced part is specially designed for Campbell Hausfeld air compressors. It is an important component which provides a tight seal between connected components. Unfortunately, over time it will wear out and it may begin to crack eventually requiring a replacement. To ensure the correct repair procedure, refer to ...Read morethe appropriate diagrams for your model. Note, this high-quality gasket is made of durable composite material and is sold as an individual item. A wrench set will be needed to perform this repair.
Read less
$34.69
Special Order
Needle Bearing
Part #ST051100AV
$37.42
In Stock
2.75 Vt Crankcase/Cyl Gas
Part #XA008800AV
Common Symptoms of the VT611900
How this model fails, and the parts that fix it.
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More