VS231100 Campbell Hausfeld Compressor - Overview

Diagrams for VS231100

See every part. Know exactly what you need.

Pump Parts

Parts for the VS231100

$15.64

Oil Seal

Part #ST021600AV

This is an authentic manufacturer sourced replacement part which is specially designed for use with Campbell Hausfeld Air Compressors. The purpose of the oil seal is to prevent oil from leaking between the crankshaft and crankcase opening. When replacing this part make sure that the compressor is unplugged and the air is bleed from the ta...Read more

Read less

$6.40

3/16 Inch Key

Part #KE000900AV

1/8 In.-27 Oil Drain Plug

Part #ST022300AV

$4.08

3/8 Inch Set Screw

Part #ST026200AV

This is an authentic Campbell Hausfeld replacement part, sourced from the original manufacturer for use with air compressors. The special set screw is commonly used to secure the pump's flywheel. This set screw is available as an individual replacement part, please see model diagram for associative parts.

$11.75

Wrist Pin

Part #VS001400AV

$19.07

Foam Filter For Vs4011

Part #VT013002AV

Needle Bearing

Part #ST021700AV

1/4 Inch Plug

Part #ST072915AV

This is an authentic manufacturer-sourced part which is specially designed for Campbell Hausfeld air compressors. It is an identical replacement for a missing or faulty 1/4 inch plug that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of ...Read more

Read less

$36.32

Ring Set

Part #VS205100AJ

$64.65

Flywheel

Part #PU004900AV

Gasket Repair Kit Vs

Part #VS204800AJ

Vs Valve Kit

Part #VS204900AJ

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

seal on the crankshaft was leaking oil

4 of 4 people found this instruction helpful.

Francis from CROWN POINT, NY
Very Easy
30 - 60 mins
Screw drivers, Socket set, Wrench (Adjustable), Wrench set

Removed the guard and belt. Heated the flywheel with a propane torch. Careful not to over heat it. Flywheel came off easily with a 3 point puller. Removed the cap and pulled the old seal out. Cleaned the bore in the cap to get all the oil out and dried it. Started the seal into the cap with the letters out. Carefully pushed the seal down ... Read more

Read less

Was this helpful?