VS223201 Campbell Hausfeld Compressor - Overview

Diagrams for VS223201

See every part. Know exactly what you need.

Air-Compressor Parts

Parts for the VS223201

$20.76

Flapper Valv

Part #VS001800AV

This is an authentic part that is supplied directly from the original equipment manufacturer for use with Craftsman Air Compressors. The exhaust flapper valve attaches on the valve plate under the cylinder head. The most common reasons for replacing the flapper valve is if there is poor performance, or the air leaks out of the intake air ...Read more

Read less

$67.62

Flapper Valve .015 Thick

Part #VS001801AV

This replacement flapper valve is a high quality item that is sourced from original equipment manufacturer for use with Campbell Hausfeld air compressors. This part is secured under the cylinder head helping to control the fuel-air mixture admitted to the cylinder. As the piston rises in the cylinder a vacuum is created in the crankcase b...Read more

Read less

$15.64

Oil Seal

Part #ST021600AV

This is an authentic manufacturer sourced replacement part which is specially designed for use with Campbell Hausfeld Air Compressors. The purpose of the oil seal is to prevent oil from leaking between the crankshaft and crankcase opening. When replacing this part make sure that the compressor is unplugged and the air is bleed from the ta...Read more

Read less

$6.40

3/16 Inch Key

Part #KE000900AV

1/8 In.-27 Oil Drain Plug

Part #ST022300AV

$4.08

3/8 Inch Set Screw

Part #ST026200AV

This is an authentic Campbell Hausfeld replacement part, sourced from the original manufacturer for use with air compressors. The special set screw is commonly used to secure the pump's flywheel. This set screw is available as an individual replacement part, please see model diagram for associative parts.

$11.75

Wrist Pin

Part #VS001400AV

$19.07

Foam Filter For Vs4011

Part #VT013002AV

$13.06

Vs Hv Head Top Plt Gask

Part #XA007200AV

1/4 Inch Plug

Part #ST072915AV

This is an authentic manufacturer-sourced part which is specially designed for Campbell Hausfeld air compressors. It is an identical replacement for a missing or faulty 1/4 inch plug that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of ...Read more

Read less

$19.33

Valve Limiter-18 Ga.

Part #VT021500AV

This is a high-quality component which is sourced directly from the original equipment manufacturer for use with Campbell Hausfeld air compressors. The valve is placed in the cylinder head assembly in the valve plates to control the flow of air into and out of the cylinder. Unfortunately, over time it may wear out or get damaged eventuall...Read more

Read less

$64.65

Flywheel

Part #PU004900AV

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

seal on the crankshaft was leaking oil

4 of 4 people found this instruction helpful.

Francis from CROWN POINT, NY
Very Easy
30 - 60 mins
Screw drivers, Socket set, Wrench (Adjustable), Wrench set

Removed the guard and belt. Heated the flywheel with a propane torch. Careful not to over heat it. Flywheel came off easily with a 3 point puller. Removed the cap and pulled the old seal out. Cleaned the bore in the cap to get all the oil out and dried it. Started the seal into the cap with the letters out. Carefully pushed the seal down ... Read more

Read less

Was this helpful?

KNOCKING SOUND AND LOCK UP

3 of 4 people found this instruction helpful.

EDWARD from PHILADELPHIA, PA
Really Easy
15 - 30 mins
Socket set

TURN OFF POWER TO UNIT
REMOVE BOLTS ON TOP SIDE OF COMPRESSOR PUMP TO REMOVE PLATE. THERE ARE 2 SMALLER PLATES THAT COVER FLAPPER W/ 2 SMALL SCREWS ON EACH (MAKE NOTE OF SMALL TOP PLATE POSITION) REPLACE FLAPPER AND REASSEMBLE. THERE IS A GASKET ON LARGER PLATE THAT MAY NEED TO BE REPLACED.

Was this helpful?