This fan assembly or also known as a condenser fan blade is used in air conditioners. The blade fits onto the motor shaft and distributes air over the condenser to cool the refrigerant before it goes into the evaporator. This part blows air parallel to the motor shaft which the blade rotates on to successfully circulate the air. It is mad...Read moree from white plastic. *Please note: This part is sold individually. This part comes with a slinger ring. Refer to the manual provided by the manufacturer for installation instructions and further guidance.
This control board, also known as a display board, is used for air conditioners. The control board regulates and carries the power to the various air conditioner components. If your control is defective or broken, it should be replaced or it will affect how your air conditioner functions. Check for other commonly defective parts that occu...Read morer before replacing the control board. Refer to the manual provided by the manufacturer for installation instructions and accurate guidance. Remember to unplug your appliance from the power source for safety before beginning this repair.
The installation kit contains the hardware you need to install the room air conditioner in a window. The kit also includes the accordion filler panels, installation brackets and seal.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
window air conditioner up and quit--not blowing warm air, just totally quit--nothing, nada
Eric from Santa Fe, NM
Really Easy
1- 2 hours
Screw drivers
I hotwired the compressor and fan directly to 110 volts and it all functioned so I knew it was electronics. Ordered two circuit boards and after putting the first one in it fired right up. Returned the second one. The one that was bad had all the relays on it--the one with the digital readout and switches was good, which was great beca
... Read moreuse the old remote continued to work. Not sure if a new board would work with the old remote or if the remote needed to be replaced also...