UT80953D Homelite Pressure Washer - Overview

This detergent suction kit, also known as a soap or chemical injection kit, is designed for use with a pressure washer. This is a genuine OEM part designed to inject soap into the water stream of your pressure washer, and includes the main injector valve, two differently sized O-rings, a spring, and a ball bearing. One end of this kit wil...Read morel be threaded into the washer, and the other will lead to your cleaner with a siphon, which is sold separately. This injection kit would need to be replaced if the nozzle is leaking, the injector fails to work properly, or water is getting into the soap dispenser. To replace, simply unscrew the previous injector and remove it, then fit the small O-ring inside the threaded end of the new injector, along with the ball bearing and then spring. Wrap the larger O-ring around the base of the threaded end, and apply a layer of lubricant, before installing the new injector and securing it.

This OEM outlet tube, also known as a hose connector, allows pressurized water to flow from the pump of your pressure washer to the nozzle. Connecting the hose to the handle assembly and the spray wand, it is where the water exits from your machine so you can direct the stream towards a desired surface. You can tell if an outlet tube is b...Read moreroken when it has visible cracks or holes and when water leaks or sprays from the connection points or along the tube. A damaged or blocked tube can result in a loss of pressure and potentially premature wear or machine failure. To remove the outlet tube, use a wrench set to unscrew it from the pump. Please note that this replacement part is sold separately from the pump assembly.

(25 ft., 3000 psi) This water hose is for pressure washers. Water hose carries water from the pump to the spray wand. Wear work gloves to protect your hands when installing this part.

This is an authentic OEM part for pressure washers made by Homelite, Ryobi, and Husky. The inlet tube fits onto the pump and is made out of metal. When replacing this part a socket set may be needed. It is available as an individual replacement part, but also includes the metal bolt and the rubber o-ring.

This is an original replacement part designed for the Homelite and Ryobi pressure washers listed below. This is a low pressure nozzle which draws soap/chemical mixture from the detergent tank, and gently spray a light coat onto a surface for cleaning. This soap nozzle may also be called a chemical injector tip. One (1) nozzle is included.

It is a genuine replacement part that is supplied by original equipment manufacturer for use with Homelite, Ridgid and Ryobi pressure washers. This siphon tube is used to deliver the chemical solution from the tank to the pump. Over time the tube may develop cracks allowing for leaks, if this happens this part can easily be replaced. It is made of durable flexible rubber material and it is sold individually.

The spark plug attaches to the cylinder head. This item is an OEM from Homelite and Ryobi for use in generators and pressure washers. This is available as an individual replacement part. A wrench might be needed during the installation process. It is made of metal and will require replacing if it breaks.

This is a manufacturer-sourced component which is designed for use with Homelite pressure washers. The purpose of the pump is to produce pressure in the air tank. Over time it may wear out and begin to fail eventually requiring a replacement. Keep in mind this high-quality pump is sold individually. To ensure the correct installation, che...Read moreck the appropriate diagrams of your model. You will need a wrench set to remove the old one and connect the new one. Make sure to drain the air from the tank before starting this repair.

This is an authentic OEM quick connect nozzle, guaranteed compatible with the Ryobi and Homelite machines listed below. This is a standard green pressure washer tip with a twenty-five (25) degree spray width. It is a nozzle used for regular cleaning duties such as removing dirt from decks or cars, and works very well with soap/detergents...Read more. It is one step more powerful than the white forty degree tip (the least powerful of the quick change nozzles). This is a commonly used nozzle so a backup would come in handy. Sold individually.

This is an authentic Ryobi replacement part that has been sourced from the original manufacturer to be used with circular saws. The two wire cord is encased in a durable casing and is used to relay electricity from the outlet to the switch assembly. This cord is available as an individual replacement part.