UT33600B (090330017) Homelite Trimmer - Overview

This authentic OEM starter rope measures 42-inches and is for use with various models of outdoor power equipment. Made of nylon, this rope wraps around the starter recoil spring and when pulled, is used to start the engine. This rope is sold as an individual part, so any necessary grips are sold separately.

This OEM spring, also known as a recoil or rewind spring, is housed in a container and is used to retract the starter rope on various lawn equipment models. Over time and through use, the spring will eventually lose its tension, and will break. If your starter rope has no resistance when pulling it, the starter spring is likely broken. Me...Read moreasuring at approx. 3-inches by 3-inches, this spring is suitable for use with a variety of lawn equipment models and is sold individually.

Introducing the practical and sturdy Lower Housing Stringhead by Ryobi. This essential component, lower housing, has an arborless design and is an integral part for various Ryobi trimmers, offering firm support and secure placement. Renowned for its durability and excellent build quality, this part helps extend your trimmer's lifespan, pr...Read moreoviding smooth and efficient operation. Crafted using high-quality materials, this lower housing stringhead promises a long-lasting performance, ensuring your trimmer remains reliable and efficient. So, maximize the potential of your Ryobi trimmer with this effective, easy-to-install Ryobi Lower Housing Stringhead. Remember, using Ryobi genuine parts maintains the original integrity of your equipment.

This is an authentic replacement part manufactured for use with trimmers. The special spring is used to provide compression for the spool to recede into the housing when bumping more string out of the trimmer head. This spring is sold as an individual replacement part, and will come with the complete trimmer head assembly. Please see model diagram for associative parts.

This OEM switch is used on a variety of different lawn equipment models and is sold individually. This switch is used to turn your lawn equipment on and off, so if your equipment is either not turning on, or this switch feels loose within its housing, it may be time to replace it. To remove it, separate the two halves of the housing which...Read more it connects to, disconnect the throttle and other wires with pliers, and depress the securing tabs. To install the new switch, click it into place within the housing and connect the appropriate wires to the two terminals, and then reconnect the throttle cable and other wires, and then simply align the two halves of the housing and secure with screws.

This replacement ignition module is a high quality item designed for use with Ryobi gas powered blowers and vacuums. This ignition module also known as an armature magneto produces pulses of high voltage for the spark plugs. It is made out of metal with rubberized wire and the spark plug boot. To complete this repair you will need a screwdriver set.

This bolt helps to secure air filter and carburetor assemblies to the short block. It is sourced from original equipment manufacturer for use with string trimmers. Usually this bolt would need replacement if it is lost or has stripped threads or head socket. To install or remove this bolt a hex key/allen wrench would be needed.

This is an OEM sourced replacement part used on gas trimmers. A centrifugal clutch is a part that uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driven shaft. Today's centrifugal clutches will function even when they shouldn't, far beyond the point of when they need to be replaced. Keepin...Read moreg an eye on equipment performance will determine when the centrifugal clutch requires attention. Please note the clutch drum, spacer and washer are all sold separately. This clutch is made out of metal and it is sold individually. To replace this item you would need a screwdriver and pliers.

Genuine OEM replacement part, this item is sold individually. The purpose of the 901551001 Intake Gasket is to create a seal between the Heat Dam and the cylinder head. Over time because of the heat it is exposed to this gasket will deteriorate and will have to be replaced.