The Fuel Tank is an OEM replacement part.
It is compatible with the models shown below.
It includes the fuel lines, fuel cap and fuel filter.
If you need to order the fuel tank bumpers, they are sold individually as part number 98792.
This OEM spring, also known as a recoil or rewind spring, is housed in a container and is used to retract the starter rope on various lawn equipment models. Over time and through use, the spring will eventually lose its tension, and will break. If your starter rope has no resistance when pulling it, the starter spring is likely broken. Me...Read moreasuring at approx. 3-inches by 3-inches, this spring is suitable for use with a variety of lawn equipment models and is sold individually.
The chainsaw starter rope is a three-foot-long white rope that is approved by the original equipment manufacturer, and which wraps around the recoil pulley and is pulled to start the engine. Installation is rated as "Easy" by customers and requires a screw driver, pliers, and torx screwdriver. If the rope breaks it should be replaced. Ref...Read moreer to your make, model and diagram to ensure this rope is right for your machine.
Springs are used within outdoor power equipment to provide tension and shock absorption, depending on their application and use. This spring is designed for use within trimmers/brush cutters and is made to provide tension on the spool reel mechanism, and in some cases may be used to advance the line whenever portions of it are cut off. Th...Read moreis spring measures approximately 1.3-inches in length when extended and comes as an individual part. If you notice the line/spool in your trimmer is not advancing or is coming too quickly, the spring may be damaged and need replacing. Since this spring is a high-use part, it is not uncommon for it to lose tension over time and need to be replaced. To replace the spring, you will need to unscrew the covering cap, remove the spool feeding reel, remove the old spring and install the new spring with the rest of the assembly. Make sure to feed the line back into the appropriate feeding holes prior to operation of the trimmer.
Genuine OEM replacement part, this part is sold individually. This part is where the stringhead assembly is mounted on the Trimmers shown below. It attaches to the spindle. The thread mount on the spindle is a left hand thread.
This spark plug is an authentic Craftsman replacement part, and is compatible with chainsaws. The spark plug produces a spark that ignites the fuel in the engine. A socket wrench will be needed to install or replace the spark plug. This part is made of ceramic with metal and is sold individually.
This crankcase cover gasket seals the crankcase cover of your lawn equipment engine, preventing air or fuel leaks and maintaining proper internal pressure. It is sized at 2 1/2 inches by 2 1/2 inches and is commonly found where the crankcase cover attaches to the engine block. You can tell if a crankcase cover gasket is broken if there is...Read more oil around the edges of the cover. Your machine may also experience a loss of power or unusual noise. If the gasket is not replaced, your machine may have fuel leaks or decreased performance. Debris and contaminants will also enter the engine, reducing the lifespan of your machine. When replacing the gasket, use a wrench or socket to unthread any bolts securing the crankcase cover. You will then be able to take the gasket off your machine. Bear in mind that this OEM gasket is sold individually.
This is a genuine manufacturer sourced replacement throttle cable designed for use with handheld string trimmers. Throttle cable is connected to the carburetor and it stops the engine when you shift the lever to the full choke position. Please note the housing, trigger and screws are sold separately.
Genuine OEM replacement part, this item is sold individually. This Fuel Cap is is on the fuel tank on the outdoor products shown below. This is a vented Fuel Cap. It includes a gasket inside the Cap.
The air filter in your trimmer keeps the engine running smoothly. It filters out dirt and debris from the air before it enters the engine, ensuring that clean air is used for efficient fuel combustion. This helps protect the engine and maintain its performance. If the air filter is clogged or damaged, it should be replaced to avoid reduce...Read mored engine performance, increased fuel consumption, and potential engine damage. To remove the existing filter, consult your user guide to locate the air filter housing. Depress the locking tab on the housing cover, lift it off, and remove the filter. Follow any specific installation instructions for your machine model. Please note that this OEM air filter is sold individually.
This is a manufacturer approved replacement cover designed for use with gas string trimmers/pruners/brush cutters. The purpose of this cover is to secure air filter element which is sold separately and it protect internal parts like carburetor from dirt and debris. It is made out of plastic and it is sold individually. Replacing this part does not require any tools. It simply snaps into place.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
J Martinez - For model number UT20046
July 14, 2026
Problem starting
Hi J, thank you for your inquiry. If the trimmer has old fuel in the tank, drain it completely and refill with a fresh 50:1 mix of unleaded gas and quality 2-cycle oil. Old fuel breaks down into a sticky varnish that clogs the carburetor passages and prevents starting. If the fuel is fresh, remove the air filter and spray a small burst of carburetor cleaner directly into the intake, then pull the starter cord. If it briefly fires and dies, the carburetor is clogged and needs to be cleaned. Also, remove the spark plug and inspect it for heavy carbon buildup, wet fuel, or a cracked insulator. Replace the spark plug, part number PS10018285, it is damaged or has heavy carbon buildup. Finally, check the fuel lines inside the tank for cracks, brittleness, or rot. A cracked fuel line draws in air instead of fuel and will prevent the engine from starting regardless of the condition of the other components. Glad to be of help!