UT15522D Homelite Trimmer - Overview

This flanged star washer is a manufacturer-sourced replacement part designed for use trimmers. It is also known as a tooth lock washer due to its serrated inner edge which resembles inward facing teeth. These teeth bite into the head of the fastener and provide a better grip than standard washers. This washer also has a flange on one side...Read more which is a lip that extends past the edge of the washer. It helps to distribute the load of the fastener over a wider area to provide extra stability and a more secure hold. Over time the washer may wear down or become damaged. To remove the washer, first unthread the bolt/screw it is fastened on. Use pliers to grip the washer and gently twist it off. Place the new washer over the fastener with the teeth facing toward the surface being fastened and insert it into the designated hole. Ensure that it is locked into place. Each washer is sold individually.

Springs are used within outdoor power equipment to provide tension and shock absorption, depending on their application and use. This spring is designed for use within trimmers/brush cutters and is made to provide tension on the spool reel mechanism, and in some cases may be used to advance the line whenever portions of it are cut off. Th...Read moreis spring measures approximately 1.3-inches in length when extended and comes as an individual part. If you notice the line/spool in your trimmer is not advancing or is coming too quickly, the spring may be damaged and need replacing. Since this spring is a high-use part, it is not uncommon for it to lose tension over time and need to be replaced. To replace the spring, you will need to unscrew the covering cap, remove the spool feeding reel, remove the old spring and install the new spring with the rest of the assembly. Make sure to feed the line back into the appropriate feeding holes prior to operation of the trimmer.

Genuine OEM replacement part, this part is sold individually. This part is where the stringhead assembly is mounted on the Trimmers shown below. It attaches to the spindle. The thread mount on the spindle is a left hand thread.

This is a genuine OEM replacement part, it is sold individually. The Housing and Eyelet contain the spring and the spool and string for the models listed below. The cutting string is inserted through the eyelets, then the spool is inserted into the housing, it is then attached by the spool retainer.

This is a genuine item that is supplied by the original equipment manufacturer for Ryobi, Toro and Homelite handheld lawn and garden equipment. It is an identical replacement for a missing or damaged string guard clamp that was originally installed on a new unit, please make sure to refer to the owners manual of your model for the correct...Read more application of this component. Keep in mind this high-quality part is made of durable metal and is sold individually.

This hanger cap, also known as a mounting clip, is a genuine replacement part from the equipment manufacturer to help you store hand attachments that you are using. It is a small plastic cap that acts as a protective cover for the hanger hook in lawn and garden equipment. It protects the hook from damage and keeps it from getting caught o...Read moren other items. You will need one cap for each of the attachments or tools you have. The cap will need to be replaced if it is damaged or can no longer stay attached to the equipment. To install the new cap, simply place the new cap at the end of the attachment on your equipment. Sold individually.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Homelite and Ryobi handheld lawn and garden equipment. This is the special screw which is utilized to secure the gear head, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. K...Read moreeep in mind this durable metal hex head screw is sold individually, you will need a wrench to secure or remove it.

This is an authentic replacement part manufactured for use with Homelite edger attachments. The special drive shaft is used to link the upper drive shaft to the gear head to drive the cutting head assembly. This flexible drive shaft is available as an individual replacement part, please see model diagram for associative parts.