UT15520A Homelite Trimmer - Overview

This genuine OEM guide bar supports the cutting chain on your handheld lawn equipment. It extends from the main body of your machine, holding the chain securely. It is 12 inches long but designed for a maximum cutting length of 10 inches. To determine if a guide bar is broken or damaged, look for visible cracks, bends, or excessive wear. ...Read moreCheck if the guide bar is misaligned or feels loose when attached to the chainsaw. A broken guide bar can cause binding, difficulty cutting, or excessive vibration. Not replacing a damaged guide bar can lead to safety risks, reduced performance, and increased wear. To replace a guide bar, you will need a screwdriver and a wrench. Start by loosening the tension on the blade. Next, remove the bar clamp assembly and lift the blade out of the old bar, taking care to free it from around the sprocket. Finally, remove the old bar. Please note that this guide bar is sold separately from the cutting chain.

This genuine OEM replacement part is for use with chainsaws. The metal pin is used to adjust the bar when the bar adjustment screw is engaged. This special guide bar adjustment pin is sold individually, please see model diagram for any additional parts.

This hanger cap, also known as a mounting clip, is a genuine replacement part from the equipment manufacturer to help you store hand attachments that you are using. It is a small plastic cap that acts as a protective cover for the hanger hook in lawn and garden equipment. It protects the hook from damage and keeps it from getting caught o...Read moren other items. You will need one cap for each of the attachments or tools you have. The cap will need to be replaced if it is damaged or can no longer stay attached to the equipment. To install the new cap, simply place the new cap at the end of the attachment on your equipment. Sold individually.

Genuine OEM replacement part, this part is sold individually. This Gasket acts as a seal to keep the oil from leaking. It is installed in between the Oil Tank Cover and the Gearcase and Cover Assembly on the outdoor products listed below. If you begin to see oil leaking from the Gearcase Assembly it is probably time to replace the gasket.

This is a genuine OEM replacement strap made for various yard tools. This fabric strap features one metal lobster clasp, which attaches to the tool via the strap hanger. It is adjustable with a plastic slide adjuster. One strap is included.

This is a genuine OEM sourced part that is intended to be used with Homelite chainsaws and Ryobi pruners and chainsaws. The plastic oil cap is used to cover the oil tank fill spout to prevent spills and to stop contaminants from entering the tank. The cap includes the tether that connects the cap to the tank and the cap is priced as a single item.

A genuine replacement part which is supplied directly from the original equipment manufacturer for use with Homelite and Ryobi handheld lawn and garden equipment. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality screw is made of durable metal and is sold individually.

Keep in mind that this item and is priced individually. The guide bar adjusting screw is made out of metal. During replacement, it will require a phillips screwdriver to install this part correctly. Over time this item may strip or break and will need to be replaced. It is a genuine OEM sourced part which is specially designed for use with Homelite pruners, saws, and trimmers.

The hex nut attaches to the drive case cover. This part is made of metal and is sold individually even though many nuts may be needed during installation. This part may become stripped or lost and will need to be replaced. A wrench will be needed when replacing this part. It is an authentic OEM sourced item which is specially designed for use with Homelite and Ryobi chainsaws.

This is a genuine OEM sourced part which is specially designed for use with Ryobi handheld pruners. It is an identical replacement for a missing or a faulty intermediate boom assembly that was included with a new unit, please make sure to refer to the appropriate diagrams of your model for the correct application of this component. This b...Read moreoom assembly has a flexible drive shaft inside which rotates the chain. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is a genuine part from original manufacturer, compatible with many Ryobi and Homelite chainsaws. An E-ring is a circular metal piece, notched with one open side. They are designed to clip into place on a shaft in order to keep other parts secured. Sold individually.