UT10562 Homelite Chainsaw - Overview

This is a genuine OEM replacement part, it is made out of Metal with Fabric Filter Material. It is sold individually and is used on a variety of Lawn and Garden Equipment. This is an in-tank fuel filter which makes sure that the fuel delivered to the engine is free of any debris or contaminants. It will over time become clogged and restrict the fuel getting to the engine so it will need to be replaced.

This spark plug is an authentic Craftsman replacement part, and is compatible with chainsaws. The spark plug produces a spark that ignites the fuel in the engine. A socket wrench will be needed to install or replace the spark plug. This part is made of ceramic with metal and is sold individually.

This is an OEM replacement part,it is sold individually. The purpose of the Air Purge Bulb is to purge all of the air from the carburetor. It then brings fuel up through the fuel line in the tank into the carburetor. Once the carburetor is full of fuel the Bulb will force the excess fuel back into the tank through the fuel return line. ...Read moreOver time the bulb will loose it elasticity or begin to crack, it will need to be replaced at this time.

This is an authentic OEM sourced replacement part is designed for use with Homelite chainsaws. The purpose of the tension nut serves to tighten and secure the chainsaws clutch cover lock knob. It is made out of metal with plastic and it is sold individually. This part is a merged assembly of old part# 518769001 (Cover Knob) and 678618002 (Tension Nut).

This is a genuine manufacturer-sourced part which is specially designed for use with Homelite and Ryobi chainsaws. It is an identical replacement for a missing or damaged oil pump assembly that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and use of this componen...Read moret. Keep in mind this high-quality assembly is made of durable metal and is sold individually.

This air filter is a commonly used item on Homelite chainsaws. It is designed to filter our dust and debris from the air. It is advised to periodically check air filters, because, over time they will get dirty no longer being able to supply clean air to the engine. This may cause poor performance and may develop further problems with an e...Read morengine. At this point filter should definitely be replaced. Includes one (1) foam filter per order. Replacing this air filter is easy task and would only require a torx screwdriver. • First remove screws from cover/housing • Remove remove cover and replace old filter • Reassemble and test the chainsaw

A genuine item which is supplied directly from the original equipment manufacturer for use with Homelite chainsaws. It is an identical replacement for a missing or faulty oil pump inlet tube which was originally installed on a new unit, please refer to the appropriate diagrams of your model for the correct location and application of this...Read more hardware. Keep in mind this high-quality item is made of durable material and is sold individually.

This is a genuine manufacturer-approved replacement part which is specially designed for Homelite chainsaws. It helps to provide a tight fit between connected component allowing them to rotate with minimum friction. If the bushing is damaged or is missing, this will provide an identical replacement for the original hardware that was insta...Read morelled on a new unit. Refer to the appropriate diagrams for your model to ensure the proper replacement procedure. Note, one durable metal bushing is included. You will need a wrench set to perform this repair.

The adjustment knob attaches to the clutch cover ring. Keep in mind that this part is sold individually and is made out of plastic. This is an OEM part sourced directly from the manufacturer and used in chainsaws made by Homelite. A screwdriver might be necessary during the installation of this part. It will need to be replaced if it becomes broken.

This is a genuine OEM sourced replacement part designed for use with Homelite and Ryobi chainsaws and backpack blowers. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to appropriate diagrams of your model for the correct location and use of this item. This Torx screw is made of high-quality metal and it is sold individually.

This metal OEM wire clamp is a type of fastener that holds hoses or cables together and keeps them from moving while your machine is operating. It is mostly found in lawn equipment to attach its fuel line to the filter. You can tell that the metal clamp is broken if the parts it was securing has become loose or has fallen off. When this h...Read moreappens, your equipment may start leaking and can pose as a safety hazard. To remove the wire clamp, you need a pair of pliers. Grip onto a broken clamp before twisting it counterclockwise to release it from your machine. This item is sold separately.