UT10548 Homelite Chainsaw - Overview

This guide bar nut is sourced from the original equipment manufacturer for use in chainsaws. It is made of metal, and has a diameter of 5/16 of an inch and a thread pitch of 18 threads per inch. The guide bar nut also has a flange on one end for added stability and security. The nut is responsible for holding the guide bar and chain in pl...Read moreace and ensures proper tension and alignment of the chain, for safe and efficient cutting. A faulty guide bar nut will result in the chain becoming loose or detached during operation, which poses a safety risk to the user. Additionally, a loose chain will result in reduced cutting ability, and damage to the guide bar. It is recommended to check your equipment manual for the correct number of guide bar nuts needed. Each nut is sold individually. Use a socket tool to loosen and remove the old nut. Clean the area around the guide bar and thread to ensure a good fit, and then insert the new nut and tighten it securely. Ensure that the chain is adequately tensioned before attempting to use the chain saw again.

This is a genuine OEM replacement part, it is made out of Metal with Fabric Filter Material. It is sold individually and is used on a variety of Lawn and Garden Equipment. This is an in-tank fuel filter which makes sure that the fuel delivered to the engine is free of any debris or contaminants. It will over time become clogged and restrict the fuel getting to the engine so it will need to be replaced.

This spark plug is an authentic Craftsman replacement part, and is compatible with chainsaws. The spark plug produces a spark that ignites the fuel in the engine. A socket wrench will be needed to install or replace the spark plug. This part is made of ceramic with metal and is sold individually.

This is an authentic OEM sourced replacement screw designed for use with chainsaws. It helps to secure the muffler assembly. This part is made out of metal and it is sold individually. You would need a wrench to tighten/loosen this screw.

This replacement adjustment screw is an authentic OEM supplied item that is specially designed for use with Homelite chainsaws. This screw is an important component of chain tensioning mechanism if the bar doesn't adjust when you turn the tension screw usually the tensioner pin or the adjustment screw is worn or damaged. This hardware is made of durable metal and it is sold individually.

This high quality replacement chain is specially designed for use with Homelite and Ryobi chainsaws. It is a genuine OEM sourced item, not an aftermarket imitation. This chain is only for use with 14" bars only. Over time chains tend to stretch and become dull requiring replacement. Please note, this metal chain is sold individually. To ...Read morereplace this chain you will need a wrench set and a screwdriver. • Remove the guide bar side panel • Release the chain tension • Remove the old chain • Loosen the tension screw • Thread the new chain onto the saw • Align the guide bar • Replace the side plate • Tighten the chain to the correct tension • Finish tightening the side plate nuts

This is a genuine part from original manufacturer. This sprocket drum and bearing is used in some Homelite chainsaws. A sprocket engages the chain while the bearing allows for reduced friction and stable motion. This is a relatively high wear part and usually needs replacement with regular use. Sold individually.

This is an authentic OEM sourced replacement primer bulb assembly designed for use with Homelite and Ryobi handheld lawn and garden equipment. This bulb system allows user to get fuel into the carburetor for cold starting. At some time the primer will lose its elasticity or crack requiring replacement. It is made from flexible rubber material in a plastic housing and it is sold individually.

This is a Manufacturer Sourced replacement part for Lawn and Garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This Locking Nut has multiple uses based on your tool. You would need a Wrench to tighten or loosen this Hex Nut.

It is an authentic OEM supplied item that is designed for Homelite chainsaws. The adjusting nut is an important component of the chain tensioning mechanism. Over time it may wear out, get damaged or lost eventually requiring a replacement. Keep in mind this high-quality adjusting nut is made of durable metal and is sold individually. Chec...Read morek the diagrams for your model to ensure the correct repair procedure. A wrench set will be needed to replace this hardware.

This is a genuine manufacturer-sourced part which is specially designed for use with Homelite and Ryobi chainsaws. It is an identical replacement for a missing or damaged oil pump assembly that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and use of this componen...Read moret. Keep in mind this high-quality assembly is made of durable metal and is sold individually.

This air filter is a commonly used item on Homelite chainsaws. It is designed to filter our dust and debris from the air. It is advised to periodically check air filters, because, over time they will get dirty no longer being able to supply clean air to the engine. This may cause poor performance and may develop further problems with an e...Read morengine. At this point filter should definitely be replaced. Includes one (1) foam filter per order. Replacing this air filter is easy task and would only require a torx screwdriver. • First remove screws from cover/housing • Remove remove cover and replace old filter • Reassemble and test the chainsaw