UT-10532 Homelite Chainsaw - Overview

This is an OEM replacement part,it is sold individually. The purpose of the Air Purge Bulb is to purge all of the air from the carburetor. It then brings fuel up through the fuel line in the tank into the carburetor. Once the carburetor is full of fuel the Bulb will force the excess fuel back into the tank through the fuel return line. ...Read moreOver time the bulb will loose it elasticity or begin to crack, it will need to be replaced at this time.

This is a Manufacturer Sourced replacement part for Lawn and Garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This Locking Nut has multiple uses based on your tool. You would need a Wrench to tighten or loosen this Hex Nut.

It is an authentic OEM supplied hardware that is designed for use with Homelite and Ryobi chainsaws. This special screw is used to secure the Safe-T-Tip to the bar. Please note this high quality hex head screw with a washer is sold individually, you will need a wrench to secure or remove it.

Authentic manufacturer approved replacement bolt made for use with string trimmers and chainsaws. This is a standard hardware with multiple uses based on your tool. Please refer to specific diagrams for correct application. This bolt has a hex socket head which requires a hex key/allen wrench for installation. It is sold individually.

This replacement clutch assembly is utilized on Homelite and Ryobi chainsaws. It is a genuine OEM sourced item, not an aftermarket equivalent. A centrifugal clutch connects two concentric shafts with the driving shaft nested inside the driven shaft. Keeping an eye on equipment performance will determine when the centrifugal clutch require...Read mores replacement. Please note the clutch drum, spacer and washer are all sold separately. This clutch is made from durable metal material and it is sold individually. To complete this repair you will need a screwdriver and pliers.

The hex nut attaches to the drive case cover. This part is made of metal and is sold individually even though many nuts may be needed during installation. This part may become stripped or lost and will need to be replaced. A wrench will be needed when replacing this part. It is an authentic OEM sourced item which is specially designed for use with Homelite and Ryobi chainsaws.

This is a manufacturer approved replacement guide bar designed for Homelite chainsaws. The purpose of a bar is to hold the cutting chain. Having a bent or damaged bar is extremely dangerous and it should be replaced immediately. Guide bar is made out of metal and it is sold individually. Designed to accommodate for a 16" chain only. You...Read more would need a screwdriver a wrench set to replace this part. • Remove the housing • Release the chain tension • Remove the chain and the tensioner • Remove the bar and replace it with a new one • Secure the tensioner and the chain • Reassemble the housing and tighten the chain

This replacement switch is an authentic item that is supplied directly from original equipment manufacturer for use with Homelite and Ryobi equipment. It is the key component of the tool handling on/off operations. Over time either mechanical or electric components of the switch may begin to fail eventually requiring replacement. Please note this high quality plastic body switch is sold individually.

This is a genuine part from original manufacturer, compatible with many Ryobi and Homelite chainsaws. An E-ring is a circular metal piece, notched with one open side. They are designed to clip into place on a shaft in order to keep other parts secured. Sold individually.

This assembly is commonly used for Homelite and Ryobi chainsaws. It is an authentic OEM part. Bearings buffer and secure moving parts so that they move properly and with lower friction. A sprocket moves the chain when drum is activated by the clutch. Included in this assembly is sprocket drum and bearing. Assembly is sold individually.

The bronze element filter attaches to the duckbill valve. It is available as an individual replacement part. This item is an OEM from Homelite and Ryobi for use in saws. A set of pliers might be needed during the installation process. It will require replacing if it breaks.