This is a genuine OEM replacement part, sold individually. This Bumper helps keep the fuel tank in place, and minimizes vibration of the fuel tank. This part is used with a variety of string trimmers, compatible with the models listed below.
This rope is part of the pull starter system on Homelite and Ryobi gas powered lawn and garden equipment. It is an authentic manufacturer sourced replacement part, not an aftermarket equivalent. When the rope is pulled to start the engine, it is returned back into the starter pulley by means of the starter spring which is sold separately....Read more Please note, this rope is made out of strong fabric and it is sold individually. Replacing this starter rope you will need a screwdriver. • Remove the housing-cover • Remove the carburetor • Disconnect the clutch housing • Bind the engine • Remove the clutch drum • Remove the clutch • Remove the starter • Remove the starter handle • Remove the recoil pulley • Remove the old rope • Install the new starter rope • Reassemble and test the unit
This is an authentic replacement screw which is supplied by the original equipment manufacturer for use with handheld lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this item. This high-quality Torx screw is made of durable metal and it is sold individually.
This metal OEM wire clamp is a type of fastener that holds hoses or cables together and keeps them from moving while your machine is operating. It is mostly found in lawn equipment to attach its fuel line to the filter. You can tell that the metal clamp is broken if the parts it was securing has become loose or has fallen off. When this h...Read moreappens, your equipment may start leaking and can pose as a safety hazard. To remove the wire clamp, you need a pair of pliers. Grip onto a broken clamp before twisting it counterclockwise to release it from your machine. This item is sold separately.
This manufacturer sourced part is designed for use with Homelite and Ryobi handheld lawn and garden equipment. It an identical replacement for a missing or a damaged screw that was installed on a new unit. This is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model ...Read morefor the correct location and application of this component. Keep in mind this high-quality screw is made of durable metal and is sold individually.
This is an authentic Homelite replacement part manufactured fur use with string trimmers and hedge trimmers. The special rubber tubing is commonly used to return fuel to the tank when purging the carburetor. This rubber tubing is used with serval different models of equipment and can have multiple applications. This piece of rubber tubing...Read more is sold as an individual replacement part, please see model diagram for the tubing's location and usage.
This is an authentic Homelite replacement part, sourced from the original manufacturer for use with outdoor power equipment. The special rubber tubing is used to carry fuel that powers the tool's engine. This length of tubing is available as an individual replacement part, please note the tubing will need to be cut to fit. Approximate length • 10' (3048 mm)
This is an authentic Homelite replacement part. The retaining bracket is designed by the manufacturer for use in blowers and trimmers. This part includes five metal brackets, which are used in securing the starter pulley in the starter assembly. You will require an Allen wrench or hex key when replacing this part.
This is an authentic replacement part that has been sourced from the original manufacturer to be used with trimmers, pruners and blowers from Ryobi and Homelite. This pan head screw is commonly used to fasten the ignition module to the cylinder assembly. The screw is available as an individual replacement part, please note two screws may be required.