Quick Question!

Have you ever purchased from PartSelect.com before?

Models > UMV1152CAS16

UMV1152CAS16 Maytag Microwave - Overview

Get Parts and Repair Help for UMV1152CAS16

If you know the microwave repair part you need, you can browse the list of all parts on the UMV1152CAS16, or you can search by name or part description. You can also find your part by where it is located on the UMV1152CAS16 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Manuals & Care Guides for UMV1152CAS16

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$14.19

Grease Filter

If the microwave exhaust fan is not circulating air properly, there could be an issue with the grease filter. A dirty filter will cause your microwave to run less efficiently and c...

$31.46

Micro Switch

This is a micro switch, which is also known as a door switch for your microwave. The main reason for needing to replace this part is if you are not getting heat to your appliance. The door switch is located behind the front panel of your appliance. When the appliance door closes, this part will make contact with the door hook, which will allow the microwave to heat. Use caution when making this installation, as high-voltage capacitors found in microwaves can hold a lethal electric charge for longer periods of time, even if the appliance has been unplugged. It is recommended you wear work gloves for this repair.

$19.80

Microwave Light Bulb - 40W

The light bulb in your microwave allows you to see inside the main compartment, and should come on automatically when you open the door. If your light bulb is not performing this f...

$21.68

Rectifier

The rectifier (also known as a diode) provides the microwave with energy to cook food. If your appliance is not producing heat or not turning on it could be due to the breakdown of the rectifier. This part works with microwaves, microwave oven combos, and wall ovens. This is one of the most common parts to fail over time in a microwave. This part is just under 3-1/2 inches in length. It is a genuine OEM part that is shipped right from the manufacturer. Make sure to use the proper precautions before attempting this repair. Ensure the appliance is unplugged.

$27.86

Micro Switch

$40.58

Glass Cooking Tray

$19.57

COUPLER

$152.39

Magnetron

This part is used to generate microwave energy/heat.

$55.58

Turntable Drive Motor

This motor rotates the glass turntable in the microwave.

$61.67

C-OIL

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

filters needed changing

  • Customer: Alma from Florence, SC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 445 of 527 people found this instruction helpful
I took the old one out and put the new one in. I want to take this time to tell you that I have repaired a few of my appliances with very little difficulty and a much lower price than Kitchen Aid charges. One was a Micrwave vent, knobs on a stove top, little rubber knobs on the bottom of a grate of my cook top which was triple the cost from what I paid to ... read more

Grease filters were missing from the over-the-stove microwave

  • Customer: Lori from Salt Lake City, UT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 64 of 126 people found this instruction helpful
Why a tenant would remove and discard the grease filters without replacing them is beyond me! But, I removed the filters from the package and slid them into place. Two minutes tops. I would like to add that I ordered these on Thursday afternoon, and I had them on Saturday; awesome customer service! read more

Both bulbs burned out at same time

  • Customer: JOHN C from NORTH BEACH, MD
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 16 of 32 people found this instruction helpful
I r/r the bulb cover, I then removed the burned out bulbs w/ a rag in case they broke they wouldn't have cut my fingers. You turn the bulbs lefty loosy. Installation is just the reverse. Install each bulb and turn righty titey, just snug the bulbs into place. Replace Glass cover and insert one phillips screw in plate and re-tighten read more