Quick Question!

Have you ever purchased from PartSelect.com before?

Models > UMC1071AAW

UMC1071AAW Maytag Microwave - Overview

Get Parts and Repair Help for UMC1071AAW

If you know the microwave repair part you need, you can browse the list of all parts on the UMC1071AAW, or you can search by name or part description. You can also find your part by where it is located on the UMC1071AAW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$31.46

Micro Switch

This is a micro switch, which is also known as a door switch for your microwave. The main reason for needing to replace this part is if you are not getting heat to your appliance. ...

$27.86

Micro Switch

$5.36

Fuse - 15 Amp 250V

$2.68

SPRING-BUTTON;-,HSWR,PI0

$28.13

Thermostat

$31.78

MOTOR SYNCHRONOUS;SSM-16

$24.42

TRAY-COOKING;NC2000,NC06

LAMP-INCANDESCENT

$14.35

ASSY GUIDE ROLLER;NC2000

$7.09

BODY-LATCH

Common Symptoms of the UMC1071AAW

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Blown Fuse - Ps1750182

  • Customer: John from Inverness, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 8 of 10 people found this instruction helpful
Unscrewed the cover of the microwave replaced the blown fuse with the new fuse, plugged in the microwave and tested all functions and everything worked fine. Thx for quick delivery. read more

no power at all

  • Customer: patricio from chicago, IL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 5 of 10 people found this instruction helpful
unscrew microwave's cover,test the fuse which is located at top rear left side, the fuse is inside a plastic tube,if the fuse is burnout,just replace it. read more

Microwave would continue to run even when door was open. (even if no time was left on timer)

  • Customer: TIFFINI from BUFFALO, WY
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 4 of 7 people found this instruction helpful
Unplugged Microwave, Removed vent cover (2 screws on top of microwave, then slide cover to the left, then forward) Removed control panel (1 screw at top of panel) then removed the two screws that hold in the door switch assembly. (these you will only see by opening the microwave). Located lower door switch, removed connecting wires, and pulled switch by re... read more