Your Subscriptions
Models
>
UCG1680L0SS
UCG1680L0SS General Electric Trash Compactor - Overview
Sections of the UCG1680L0SS
[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Compactor Bags - 15 pack
PartSelect #: PS1019150
Manufacturer #: WC60X10005
Using trash compactor bags is a practical way to remove your waste. Because compactors use such high pressure to compress the waste, using compactor bags designed to handle the force are a necessity. ...
$78.42
Special Order
RETURN SWITCH
PartSelect #: PS16542383
Manufacturer #: WC21X20249
This is a top limit directional switch for a trash compactor. The directional switch reverses the motor direction when the trash compactor has reached the top of the drawer. If your trash compactor is...
$9.55
Special Order
PEDAL FOOT ASM BB
PartSelect #: PS12722857
Manufacturer #: WC17X20131
The foot pedal on your trash compactor is located at the bottom of the unit. This part, when compressed, allows the container drawer on the trash compactor to slide in and out. If your current foot pe...
No Longer Available
POWER NUT ASM
PartSelect #: PS16554596
Manufacturer #: WC02X20287
This power nut assembly is made to be used in conjunction with your trash compactor. It comes with five pieces that include the two mounting pins, two clips, and the new power nut. This piece is beige...
$12.64
In Stock
Trash Compactor Drawer Roller
PartSelect #: PS12722845
Manufacturer #: WC02X20110
The drawer roller attaches to the bottom of the drawer and allows the drawer to roll in and out.
$34.31
In Stock
Questions And Answers for UCG1680L0SS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Deeann
June 28, 2021
The foot plate will no work up or down. It just falls down.
For model number UCG1680L0SS
Hello Deeann, Thank you for the question. We suggest having the Foot Pedal replaced. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
PEDAL FOOT ASM BB
$28.98
No Longer Available
- < Prev
- 1
- Next >
Common Symptoms of the UCG1680L0SS
[Viewing 4 of 4]Drawer is hard to open and or close
Fixed by
these parts
these parts
Show All
Doesn’t stop at end of compacting cycle
Fixed by
these parts
these parts
Show All
Compactor ram gets stuck
Fixed by
these parts
these parts
Show All
Won’t stay on
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Trash compactor would not shut off at end of cycle. Would have to manually turn it off.
Removed compactor from opening. Using screw driver unthreaded 4 screws from top and then removed the on/off dial. Face plate came off easy and provided access to relay switch bank. Unscrewed two screws which allowed both relay switches to be removed and replaced. Recommend replacing both relay switches. Reassembled and compactor worked fine. Very easy job. If your compactor is making a machine gun noise during the return cycle then this will solve your problem.
Parts Used:
-
Brian from HOUSTON, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
11 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic nut was stripped
-
john from joplin, MO
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
6 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
RAM was crooked. Power Nut was stripped.
Followed YouTube instructions. Was relatively easy to dismantle, though on this GE Profile model compactor, needed to partially undo the front panel to provide room to remove the RAM. Works great now!!
Parts Used:
-
Daniel from GALVESTON, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
