Models > UCG1600L0BB

UCG1600L0BB General Electric Trash Compactor - Overview

Sections of the UCG1600L0BB

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Compactor Bags - Package of 12 – Part Number: WC60X5017
Compactor Bags - Package of 12
★★★★★
★★★★★
(2)
PartSelect #: PS258002
Manufacturer #: WC60X5017
Using trash compactor bags is a practical way to remove your waste. Because compactors use such high pressure to compress the waste, using compactor bags designed to handle the force are a necessity. ...
$90.12
  In Stock
Frame Roller Assembly – Part Number: WC17X20084
Frame Roller Assembly
★★★★★
★★★★★
(4)
PartSelect #: PS12716561
Manufacturer #: WC17X20084
$38.98
  In Stock
RETURN SWITCH – Part Number: WC21X20249
RETURN SWITCH
★★★★★
★★★★★
(3)
PartSelect #: PS16542383
Manufacturer #: WC21X20249
This is a top limit directional switch for a trash compactor. The directional switch reverses the motor direction when the trash compactor has reached the top of the drawer. If your trash compactor is...
$10.75
  In Stock
POWER NUT ASM – Part Number: WC02X20287
POWER NUT ASM
★★★★★
★★★★★
(7)
PartSelect #: PS16554596
Manufacturer #: WC02X20287
This power nut assembly is made to be used in conjunction with your trash compactor. It comes with five pieces that include the two mounting pins, two clips, and the new power nut. This piece is beige...
$12.64
  In Stock
PEDAL FOOT ASM BB – Part Number: WC17X20131
PEDAL FOOT ASM BB
★★★★★
★★★★★
(4)
PartSelect #: PS12722857
Manufacturer #: WC17X20131
The foot pedal on your trash compactor is located at the bottom of the unit. This part, when compressed, allows the container drawer on the trash compactor to slide in and out. If your current foot pe...
  No Longer Available
Drawer roller asm – Part Number: WC01X20232
Drawer roller asm
PartSelect #: PS16591421
Manufacturer #: WC01X20232
$20.20
  In Stock
GEAR MOTOR – Part Number: WC02X20117
GEAR MOTOR
★★★★★
★★★★★
(1)
PartSelect #: PS12726309
Manufacturer #: WC02X20117
  No Longer Available
START SWITCH – Part Number: WC21X20150
START SWITCH
PartSelect #: PS12722863
Manufacturer #: WC21X20150
  No Longer Available
STOPPER – Part Number: WC11X20151
STOPPER
PartSelect #: PS12710057
Manufacturer #: WC11X20151
  No Longer Available
DOOR TILT SWITCH – Part Number: WC21X20109
DOOR TILT SWITCH
PartSelect #: PS12726323
Manufacturer #: WC21X20109
  No Longer Available
SCREW ST4.2X8_BB – Part Number: WC01X20047
SCREW ST4.2X8_BB
PartSelect #: PS12342702
Manufacturer #: WC01X20047
$8.06
  Special Order
DOOR TOE KICK ASM – Part Number: WC17X20082
DOOR TOE KICK ASM
PartSelect #: PS12710058
Manufacturer #: WC17X20082
$22.56
  In Stock

Questions And Answers for UCG1600L0BB

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the UCG1600L0BB

[Viewing 4 of 4]
Drawer is hard to open and or close
Fixed by
these parts
Fixing Fixing
Show All
Doesn’t stop at end of compacting cycle
Fixed by
these parts
Fixing
Show All
Compactor ram gets stuck
Fixed by
these parts
Fixing
Show All
Won’t stay on
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Trash compactor would not shut off at end of cycle. Would have to manually turn it off.
Removed compactor from opening. Using screw driver unthreaded 4 screws from top and then removed the on/off dial. Face plate came off easy and provided access to relay switch bank. Unscrewed two screws which allowed both relay switches to be removed and replaced. Recommend replacing both relay switches. Reassembled and compactor worked fine. Very easy job. If your compactor is making a machine gun noise during the return cycle then this will solve your problem.
Parts Used:
RETURN SWITCH
  • Brian from HOUSTON, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic nut was stripped
replaced drive nuts only problems i had was to adjust shutoff switch
Parts Used:
POWER NUT ASM
  • john from joplin, MO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
RAM was crooked. Power Nut was stripped.
Followed YouTube instructions. Was relatively easy to dismantle, though on this GE Profile model compactor, needed to partially undo the front panel to provide room to remove the RAM. Works great now!!
Parts Used:
POWER NUT ASM
  • Daniel from GALVESTON, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!