U31EA-8X Magic Chef Range - Overview
Sections of the U31EA-8X
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Clock Knob
PartSelect #: PS11744673
Manufacturer #: WP7711P466-60
This clock knob is just under an inch long. It is black in color and is made of plastic. There is a chrome disc of decoration on its top.
No Longer Available
Double Burner Assembly
PartSelect #: PS2037555
Manufacturer #: 3412A004-19
This double burner design is not to be used with sealed burner style models.
No Longer Available
GRATE BURNER
PartSelect #: PS12731250
Manufacturer #: W11400301
This square burner grate has sides measuring approximately nine inches. It is all black in color.
No Longer Available
Broiler Pan
PartSelect #: PS11741639
Manufacturer #: WP3401F075-19
This broil pan is fourteen inches wide, and almost sixteen inches long. It is made of black porcelain.
No Longer Available
Burner Cap Kit
PartSelect #: PS2178475
Manufacturer #: W10125641
Sold individually.
No Longer Available
Hinge - Left Side
PartSelect #: PS1603106
Manufacturer #: 3418A029-34
The hinges allow the door to swing up and down. The hinges must be properly adjusted in order for the door to close properly.
No Longer Available
Hinge - Right Side
PartSelect #: PS1603107
Manufacturer #: 3418A030-34
The hinges allow the door to swing up and down. The hinges must be properly adjusted in order for the door to close properly.
No Longer Available
Oven Rack
PartSelect #: PS11744744
Manufacturer #: WP7801P030-60
This oven rack is twenty-two inches long, and is made of metal.
No Longer Available
Knob Kit - Six (6) Pieces
PartSelect #: PS1574442
Manufacturer #: 12500101
Contains four (4) burner knobs and one (1) each of long and short shaft thermostat knobs.
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
leak
removed then installed new unit by hand. received order the next day-am. delivery time great.
Parts Used:
-
George from Plainville, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
12 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
30 year old gas stove needed a new burner assembly.
We lifted up the stove top, slipped the burner assembly in. It fit! who knew that we could get a part to an old stove without the model number, just by looking at a picture of the part! Terrific!
Parts Used:
-
Caroline from South Windsor, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas manifold had holes in it.
Removed locking wire from bottom burner assembly then I pulled the element out and replaced with the new one.
Parts Used:
-
Mr. J.C. from Haines City, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!